Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: ResMed
Dateigröße: 966.3 kb
Dateiname: 83cff1a0-225c-4ee9-ab3a-9fe221604a15.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
b Feed the flap of the valve through the slot in the elbow (D-8). c Press the valve clip onto the elbow until you hear both sides click into place (D-9). 6 Push the inlet tube assembly onto the elbow assembly. Reassembling the Headgear If taken apart, the headgear has five parts: headgear straps, left and right upper headgear clips, and two lower clips. 1 Attach the upper headgear clips to the mask frame (D-6). The mask incorporates lock-out features to ensure that each upper clip attaches to the correct side of the mask frame. 2 Clip the lower headgear clips into the mask frame. 3 Lay out the headgear straps, label side down. The label is on the outer side of the headgear. The internal side is smooth, to be comfortable against your face. 4 Thread the top (short) straps through the upper headgear clips (E-1, E-2). 5 Thread the bottom (long) straps through the lower clips (E-1, E-2). 6 Check that the headgear is not twisted. Storage Ensure that the mask is thoroughly clean and dry before storing it for any length of time. Store the mask in a cool dry place out of direct sunlight. Disposal The Mirage Liberty does not contain any hazardous substances and may be disposed of with your normal household refuse. 7 En gli s h Troubleshooting Problem Possible reason Possible solution Mask won’t seal properly or is uncomfortable Mouth cushion or pillows may be dirty. Clean mask according to instructions in “Cleaning the Mask in the Home”. Mask may have been fitted incorrectly. Carefully follow instructions in “Fitting the mask”. Mask is incorrectly adjusted. Check headgear is not overtightened. Mouth cushion is wrong size. Talk to your clinician. Mouth cushion is skewed in mask frame. Check insertion of cushion. Mouth cushion is misaligned or creased on face. Ensure cushion is properly aligned and that there are no creases in it: undo headgear clip, check cushion and reposition the mask on your face. Mask pillows are the wrong size. Try another size or talk to your clinician. Mask pillows are not correctly seated in your nostrils. Re-seat pillows into nostrils. Mask pillows are skewed in cushion. Check insertion of pillows. Mask is assembled incorrectly. Reassemble mask. Mask is too noisy Vents are blocked or partially blocked. Clean vents according to instructions in “Cleaning the Mask in the Home”. Valve is misassembled. Reassemble valve. Cushion is not properly inserted. Check insertion of cushion. Mask is assembled incorrectly. Reassemble mask. Valve is damaged, torn or distorted. Replace valve. Pillows are not inserted correctly into cushion. Check insertion of pillows. Mask is not sealing. Check and adjust mask as necessary. 8 Technical Specifications Note: The mask system does not contain latex, PVC or DEHP materials. Pressure–Flow Curve Note: As a result of manufacturing variations, the vent flow may vary from that indicated in the graph. Dead Space Information Dead space is the empty volume of the mask up to the elbow. The maximum dead space of the Mirage Liberty for all mask size combinations is 151 mL. Standards CE designation in accordance with EC directive 93/42/EEC, class IIa. ISO 14971, ISO 10993-1, ISO 17510-2, ISO 13485. Therapy Pressure 4 to 20 cm H2O Resistance Drop in pressure measured (nominal) at 50 L/min: 0.5 cm H2O at 100 L/min: 1.6 cm H2O Sound The A-weighted sound power of the mask is 28 dBA. Environmental Conditions Operating temperature: +5°C to +40°C Operating humidity: 10%–95% relative humidity non-condensing Storage and transport temperature: -20°C to +60°C Storage and transport humidity: 10%–95% relative humidity non-condensing V e n t Fl ow R a t e (L /m in ) Pressure (cm H2O) Flow (± 6.0 L/min) 4 22 8 32 12 41 16 48 20 54 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Mask Pressure (cm H2O) 9 En gli s h Mask sizes (excludes inlet tube and headgear) Symbols System and Packaging User Guide size width (mm) height (mm) depth (mm) small 110 92 95 large 110 100 100 Caution, consult accompanying documents Lot number Part number/Product code No latex Humidity limitation Temperature limitation Manufacturer Indicates a warning or caution and alerts you to a possible injury or explains special measures for the safe and effective use of the device. LOT REF 10 Ordering Information Limited Warranty ResMed warrants that your ResMed mask system, including its components: mask frame, cushion, headgear, tubing and other accessories (“Product”) shall be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase by the initial consumer. For further details refer to the Warranty. Ref. Item System 61310 Mirage Liberty Full Face Mask, Small – ANZ 61311 Mirage Liberty Full Face Mask, Large – ANZ 61312 Mirage Liberty Full Face Mask, Small – Asia-Pacific 61313 Mirage Liberty Full Face Mask, Large – Asia-Pacific Replacement parts 61330 Mouth cushion, Small (1 pk) 61331 Mouth cushion, Large (1 pk) 61333 Nasal pillows, Small (1 pk) 613...