Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
In this case, adjust the antenna for better reception or use an outdoor antenna. 9 1/14/05, 14:06 R R 3T10921A-E 9 ENGLISH I I I I I STEREO AND SECOND AUDIO PROGRAM (SAP) The TV is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. LISTENING TO STEREO SOUND When the TV is turned on or a channel selection is made, make certain that the word “STEREO” appears on the screen. This means that “Stereo” broadcasting is available. You can enjoy stereo sound from the left and right speakers. • When the “MONO” broadcasting is received, no indication is displayed. • If the broadcast signal is not strong enough or clear stereo sound is not available, press the AUDIO SELECT button to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound. STABLE SOUND LISTENING TO SAP (SECOND AUDIO PROGRAM) When the TV is turned on or a channel selection is made, make certain that the letters “SAP” appear on the screen. This means that the “Second Audio Program” broadcasting is available. TO SELECT DESIRED SOUND Press the AUDIO SELECT button to select the desired sound. MONO+SAP BROADCASTING MAIN SOUND (MONO) SAP SOUND STEREO+SAP BROADCASTING MAIN SOUND (STEREO) SAP SOUND L MAIN SOUND (MONO) NOTE: If connecting this TV with a VCR and/or Cable box, to receive stereo sound you must use audio/video cables for all connections. You must also verify that your VCR and/or Cable box are stereo units. When a loud sound is broadcast the stable sound feature assists in balancing the volume to a more comfortable listening level. Press the MENU button. Press the SET + or - button until the indicator next to “STABLE SOUND” begins to flash. m Press the ENTER button to select ON or OFF. MENU I CH SETUP ■ /PICTURE STABLE SOUND ON ► OFF /lsLANGUAGE I V-CHIP SET < + / - /ENTER/MENU) ADJUSTING PICTURE You can adjust the settings for color, sharpness, contrast, brightness and tint. H Press the MENU button. [2 Press the SET + or - button until the indicator next to “PICTURE” begins to flash, then press the ENTER button. [3 Press the ENTER button repeatedly to select the item you want to adjust. BRIGHTNESS—>CONTRASTCOLOR —> TINT —^-SHARPNESS t_I [4 Press the SET + or - button to adjust the setting. + - BRIGHTNESS increase brightness decrease brightness CONTRAST increase contrast decrease contrast COLOR brilliant color pale color TINT greenish color reddish color SHARPNESS makes picture clearer makes picture softer TO RETURN TO INITIAL SETTING Press the RESET button while the picture adjusting mode appears on-screen. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993. 10 3T10921A-E 10 ^ 1/14/05, 14:06 ■■■ ■mini + i ■■ rm TROUBLESHOOTING GUIDE_ Before requesting service, please refer to the following chart for the symptom and possible solution. rSYMPTOMS POSSIBLE SOLUTIONS ^ TV does not operate. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. Poor sound or No sound. • Station or CATV experiencing problems, tune to another station. • Check sound adjustments (Volume and Muting). • Check for sources of possible interference. Poor picture or No picture. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Check antenna or CATV connections, adjust antenna. • Check for sources of possible interference. • Check picture control adjustments. Poor reception on some channels. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Station is weak, adjust antenna to receive desired station. • Check for sources of possible interference. Poor color or no color. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or CATV connections, adjust antenna. • Check for sources of possible interference. Picture wobbles or drifts. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • CATV company is scrambling signal. • Adjust antenna. J SYMPTOMS POSSIBLE SOLUTIONS ^ No CATV reception. • Check all CATV connections. • Set TV/CATV menu option to the CATV mode. • Station or CATV system problems, try another station....