Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
NOTES: • When shipped from factory, the DAYLIGHT SAVING TIME option is set to AUTO position. • When the clock is not set, Daylight Saving Time setting is not available. • When there is no Daylight Saving Time in your area, always select OFF position in step 3. 13 ENGLISH 5A3A901A E P12-19 13 3/18/02, 10:07 PM MANUAL CLOCK SETTING You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly. EXAMPLE: Setting the clock to “8:30 AM”, 26th (SAT) M E N U TIMER REC SET TV SET-UP CH SET-UP AUTO REPEAT ON OFF SYSTEM SET-UP .+/–/ENTER/MENU. SYSTEM SET-UP CLOCK SET LANGUAGE/IDIOMA/LANGUE AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME .+/–/ENTER/MENU. CLOCK SET CLOCK SET .+/–/ENTER/CANCEL/MENU. MONTH DAY YEAR TIME 10 26 (SAT) 2002 8 : 30 AM 8:30 AM SAT NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly. • To move cursor backward, press the CANCEL button. TV OPERATION 1 To turn on the TV/VCR, press the POWER button. 2 Adjust the volume level by pressing the VOLUME Up or Down button. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of VOLUME 32 bars. If the volume decreases, the number of green bars also decreases. 3 Set the TV/CATV menu option to the appropriate position (See page 16). 2 Press the SET/TRACKING + or – button to select the CLOCK SET option, then press the ENTER button. 3 Press the SET/TRACKING + or – button to set the month, then press the ENTER button. 4 Set the day, year and time as in step 3. After setting the clock, time and date, the time starts functioning automatically. TV - VHF/UHF Channels CATV - CABLE TV Channels VHF/UHF/CATV CHANNELS TV CATV VHF VHF 2-13 2-13 UHF 14-69 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100)(125) 01 (5A) 4 Press the Direct Channel selection buttons to select the channel. • TV mode direct channel selection When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons (for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order. • CATV mode direct channel selection When the TV/CATV menu option is in the CATV position, channels can be selected as follows: • TO SELECT CATV CHANNELS: 1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002". 10-12 Press "0", then the remaining 2 digits. Example, to select channel 12, press "012". 13-99 Press the 2 digits in order. Example, to select channel 36, press "36". 100-125 Press the 3 digits in order. Example, to select channel 120, press "120". NOTE FOR CHANNELS 1-12: If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds. CH 012 NOTES: • If a channel with no broadcast is selected, the sound will automatically be muted. • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. October, 2002. 1 Press the MENU button. Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button. .+/–/ENTER/CANCEL/MENU. MONTH DAY YEAR TIME 10 1 (SUN) 2000 12 : 00 AM 14 5A3A901A E P12-19 14 3/18/02, 10:07 PM TV OPERATION MUTING Press MUTING button to switch off the sound. The TV/VCR’s sound will be silenced and “MUTING” will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of the VOLUME Up or Down buttons. MUTING CHANNEL UP / DOWN Press and release the CHANNEL Up or Down button. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 16 and 17 “To memorize channels”. CH 012 CALL Press the CALL button. The clock, date, channel number, real time tape counter, tape speed and VCR operation will be indicated. Press CALL button again to remove the call display. 8:47AM THU CH 01200:04:38 SPCurrent time VCR operation : Play Channel No. : Rewind Auto Repeat : Fast-forward : Eject Tape In : Recording Tape Speed : Pause Real Time Counter : Stop NOTE: To listen through the headphone, insert a headphone (not supplied) with a 1/8" mini plug into one of the PHONES jacks (One or 2 headphones can be used for private listening.) on the front. The sound from the TV speaker is muted. SLEEP To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer sett...