Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
CANCEL Pressing CANCEL while making picture adjustments will return all adjustments to the factory preset levels. NOTE: The CONTRAST default setting is set to maximum at the factory. 22 5E80301A E (18-23) 22 22/01/2003, 22:05 Stereo and separate audio program (SAP) The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. LISTENING TO STEREO SOUND When the TV is turned on or a channel selection is made, make certain the STEREO appears on the screen. This means that "Stereo" broadcasting is available. You can enjoy stereo sound from the left and right speakers. • When "Mono" broadcasting is received, no indication is displayed. • If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound. LISTENING TO SAP (SEPARATE AUDIO PROGRAM) DISPLAY/CALLTV/DVDCHCHMUTESETUP/TVMENUDVDMENURETURNINPUTSELECTSLEEPPLAYMODESLOWPLAYSKIPSKIPJUMPTV/CAP/TEXTREPEATA-BSTOPANGLEAUDIOTOPMENUOPEN/CLOSEVOLUMESUBTITLEQUICKVIEW/ZOOMSEARCHSEARCHPOWERSLOWMARKERPAUSE/STILL1234560789+.CANCELSELECT/ENTER When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the "Separate Audio Program" broadcasting is available. TO SELECT DESIRED SOUND Press AUDIO to select the desired sound. MONO+SAP BROADCASTING MONO SOUND (MAIN) SAP SOUND ENGLISH STEREO CH 013 STEREO SAP CH 013 SEL. STEREO MONO + SAP SOUND (MONO) STEREO+SAP BROADCASTING STEREO SOUND (MAIN) MONO + SAP SOUND (MAIN) MONO SOUND (MAIN) SAP SOUND 23 22/01/2003, 22:05 5E80301A E (18-23) 23 Disc About this owner’s manual This owner’s manual explains the basic instructions of this TV/DVD. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the TV/DVD may not respond to all operating commands. This is not a defect in the TV/DVD. Refer to instruction notes of discs. “ ” may appear on the TV screen during operation. A “ ” means that the operation is not permitted by the TV/DVD or the disc at the moment. For example, it is unable to skip the playback of copyright message of the disc when the SKIP( ) button is pressed. Alternatively, the “ ” may also indicate that the feature is not available for the disc. Notes on region numbers The region number of this TV/DVD is 1. If region numbers, which stand for their playable area, are printed 1on your DVD video disc and you do not find or ALL , disc playback will not be allowed by the player. (In this case, the TV/DVD will display a message on-screen.) 24 Playable discs This TV/DVD can play the following discs. Disc Mark Contents Disc Size Maximum playback time DVD video discs Audio + video (moving pictures) 12 cm Approx. 4 hours (single sided disc) Approx. 8 hours (double sided disc) 8 cm Approx. 80 minutes (single sided disc) Approx. 160 minutes (double sided disc) Audio CDs Audio 12 cm Approx. 74 minutes 8 cm (CD single) Approx. 20 minutes The following discs are also available. CD-R CD-RW CD-R/RW discs recorded by CD-DA method can be played. Some CD-R/RW discs may be incompatible. • You cannot play discs other than those listed above. • You cannot play discs of VIDEO-CD, DVD-RAM, DVD-RW, etc., or non standardized discs even if they may be labeled as above. • This TV/DVD uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.). 5E80301A E (24-31) 24 22/01/2003, 21:45 Preparation/Status display of disc The following pages describe the Preparation setup/operation in DVD mode.Before DVD/CD operation, please make preparations as follows. 1 Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: When connecting to other equipment, unplug the unit from the AC outlet. 2 Press POWER on the unit or on the remote control to turn on the unit. The POWER indicator will light. • Every time you press POWER, the TV/DVD starts from TV mode. • When using an amplifier, switch on the amplifier. 3 Press TV/DVD to select DVD mode. The DVD startup screen will appear on the screen. Status display of disc Press DISPLAY/CALL. The status display of the disc will appear on the screen. DVD Title number Title elapsed playing time Disc operation Camera angle 1/11/8 Eng DolbyDigital 1/8 Eng 1/8 1/19T C 0:07:18 2:02:31 Chapter number Title total time Audio language A kind of audio Subtitle language To make status display disappear, press DISPLAY/CALL again. Audio CD Track elapsed playing time NOTE: If the unit does not operate properly: Static electricity, ...
Dieses Handbuch ist für folgende Modelle:Fernseher - MVD2019 (1.67 mb)