Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
SYSTEM To change the video (colour) system. SLEEP To select the switch-off time in 30 minutes intervals. STANDBY/ON y yy To switch TVCR on or off, interrupt menu function. MENU To call up main menu of TVCR. STATUS/EXIT To access or remove the TVCR’s on-screen status display. To exit on- screen menus. 0..9 Press to select channels. FWD 1-B When tape playback is stopped, press to fast forward the tape at hight speed. During playback, press to fast forward the tape while the picture stay on the screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR menu. REW0-s When tape playback is stoped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stay on the screen.To return the cursor in the menu. Press to adjust the controls of TVCR menu. PLAY B-K To play a tape, select an item in the menu of TVCR. STOP C-L To stop the tape, select an item in the menu of TVCR. Red button / Green button / Yellow button/ Blue button / Doesn’t work on these models. <14PV225> o lp ol p : To switch TELETEXT on or off, or transparent mode. : enlarge font : select TELETEXT sub-page : recall hidden information : stop page changes : go back to start page. EN 2 Specifications Supplied accessories Voltage: 220-240V/50Hz • Operating instructions Power consumption (Standby): less than 5W • Remote control and batteries Rewind time: less than 260 seconds (cassette E-180) Number of video heads : 2 Recording/playback time: 3 hours (SP) (cassette E-180) Weight without packing in kg: 11.5 Dimensions in cm (HxWxD):40.0x37.3x38.0 Power consumption : 52W 1. Connecting the TV-Video Combi Preparing the remote control for operation The remote control and its batteries are packed separately in the original TV-Video Combi packaging. You must install the batteries in the remote control before use. 1. 1.1.Take the remote control and the enclosed batteries (2 batteries). 2. 2.2.Open the remote control's battery compartment and place the batteries in it as shown in the picture and close the battery compartment. The remote control is now ready to use. Its range is approximately 7 metres. Connecting the cable 1. 1.1.Insert the aerial cable plug into the AERIAL at the back of the TV-Video Combi. 2. 2.2.Connect the mains cable to the wall socket. 3. 3.3.If the little red standby light (STANDBY ) at the front panel of the set is not lit, please switch on the set using the main power switch. The power switch is located on the left side panel of the set. 4. 4.4.Language setting picture will appear on the screen. SELECTIONNER KL >FRANCAIS DEUTSCH NEDERLANDS APP. MENU POUR CONTINUER I do not see a Language setting picture * Check the cable connections. You can find more details in chapter 'Preparation for use'. Connecting additional devices You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the EXT1 socket. The respective scart socket is usually marked 'AV' or 'TV' on the decoder or satellite receiver. EN 4 2. Important notes for operation Navigation in the screen menu Switching on You can switch on the TV-Video Combi with STANDBY/ON y yy . If you press PLAY B-K , STOP C-L , PROG P+ , PROG P– , FWD 1-B , REW0-s or while 0..9 the set is in Stand-by, the power will be automatically turned on. Note that the keys 0..9 will be inactive for about 5 seconds just after having switched the TV-Video combi off. Power outage/no power Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute. You can check/change many functions and settings of your TV-Video Combi via on-screen menu. The individual functions are selected, via the remote control as follows: Call up the menu: with MENU . To select: with PLAY B-K STOP C-L . To enter or change your selection: with the number buttons 0..9 or with PLAY B-K STOP C-L . To save or confirm: with FWD 1-B . To cancel: with CLEAR . To end: with STATUS/EXIT . SELECT KL CHOOSE B >TIMER PICTURE CONTROL RECORD SET UP VCR SET UP TUNER SET UP GENERAL SET UP END=EXIT 5 EN 3. Installing your TV-Video Combi Preparation for use This chapter shows you how to prepare your TV- Video Combi for use. The TV-Video Combi automatically seeks out and stores all available TV channels. Connecting additional devices After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them. 1. 1.1.Select the desired language for the on-screen menu by pressing PLAY B-K STOP C-L . 2. 2.2.Press MENU . 3. 3.3.Confirm with PROG P+ . The automatic TV channel search starts. PLEASE WAIT START FINISH ....................... <14PV 225> 4. 4.4.'TIME' and 'DATE' will appear on the TV screen. TIME --:- DATE --/--/- SMART CLOCK [ON] END=EXIT 5. 5.5.Check 'TIME'. If required, please change the time with the number buttons 0..9 . 6. 6.6.Check if the displayed settings for 'DAY', 'MONTH' and 'YEAR' are correct. 7. ...
Dieses Handbuch ist für folgende Modelle:Fernseher - 14PV225/39 (156.85 kb)