Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Wrong connection causes no picture problem. Selecting the active input The Input signal selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. 2-3. Connecting two PCs to the monitor Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor. Connecting Examples English Signal 1 Signal2 Signal Cable (MD-C87/100 enclosed) D-Sub mini 15 pin Analog (Ex.2) Digital PC 1 PC 2 (Ex.1) Analog D-Sub mini 15 pin Signal Cable (FD-C16 enclosed) Input signal selection button ENTERAUTOSIGNAL 1 - 2 The priority input signal This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the “Input Priority” setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal. In the case of only one signal being present at either input, the monitor automatically detects and displays that signal. Priority setting Performance Signal 1 If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases. • When the power of the monitor is turned ON • When the signal input to Signal 1 is changed even if active input was Signal 2. English Signal 2 If signals from both inputs are present, the monitor gives preference to Signal 2 in the following cases. • When the power of the monitor is turned ON Manual • When the signal input to Signal 2 is changed even if active input was Signal 1. NOTE The monitor will not detect signals automatically in this mode. Select the active input by pressing the input signal selection button on the monitor’s front panel. • When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode. NOTE • Double clicking the Enter button at any time also exits the ScreenManager menu. Custom and External. To exit the menu, push the Enter button. (p. 20) FineContrast Menu Directly pressing the left or right button allows you to select the best suited mode for screen display from 6 FineContrast modes; Text, Picture, Movie, sRGB, English ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. NOTE • Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Control buttons and push the Enter button. The sub menu appears. (2) Use the Control buttons to select the desired setting icon and push the Enter button. The setting menu appears. (3) Use the Control buttons to make all required adjustments and push the Enter button to save the settings. 3. Exiting the ScreenManager (1) To return to the main menu, select the