Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Samsung Dateigröße: 19.36 mb Dateiname: Unterrichtssprache:

During the software upgrading, When the Upgrade will discontinue from last step, this function be activated. HD Connection Guide Refer to this information when connecting external devices to the TV. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software, 22 English [UC5100_Rus]BN68-02656H-00L04.indb 22 2010-03-24 ea 10:37:04 ■ I ■ ■ ► Advanced Features Connecting to a PC Using an HDMI/DVI Cable / a D-sub Cable > Q_ < Ш 3 о CD Q_ F Ф at С re Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution Is 1920 X 1080 @ 60 Hz. Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IRM 640 x Э50 Э1.469 70.086 25.175 +/- IBM 720 x 400 Э1.469 70.087 28.Э22 -/+ 640 x 480 Э5.000 66.667 Э0.240 -/- MAC 8Э2x 624 49.726 74.551 57.284 -/- 1152x870 68.681 75.062 100.000 -/- 720 x 576 Э5.910 59.950 Э2.750 -/+ \/сел гч/т 1152x864 5Э.78Э 59.959 81.750 -/+ VESA CVT 1280x720 56.456 74.777 95.750 -/+ 1280x960 75.2Э1 74.857 1Э0.000 -/+ 640 x 480 Э1.469 59.940 25.175 -/- 640 x 480 Э7.861 72.809 Э1.500 -/- 640 x 480 Э7.500 75.000 Э1.500 -/- 800 x 600 Э7.879 60.Э17 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 1024x768 48.Э6Э 60.004 65.000 -/- 1024x768 56.476 70.069 75.000 -/- 1024x768 60.02Э 75.029 78.750 +/+ \/EQA ПУТ VESA DMT 1152x864 67.500 75.000 108.000 +/+ 1280x 1024 6Э.981 60.020 108.000 +/+ 1280x1024 79.976 75.025 1Э5.000 +/+ 1280x720 45.000 60.000 74.250 +/+ 1280x800 49.702 59.810 8Э.500 -/+ 1280x800 62.795 74.9Э4 106.500 -/+ 1280x960 60.000 60.000 108.000 +/+ 1Э60x768 47.712 60.015 85.500 +/+ 1440x900 55.9Э5 59.887 106.500 -/+ 1440x900 70.6Э5 74.984 1Э6.750 -/+ 1680x 1050 65.290 59.954 146.250 -/+ i/сел лтс 1280x720 52.500 70.000 89.040 -/+ VESA GTF 1280x 1024 74.620 70.000 128.94Э -/- VESA DMT / DTV CEA 1920x 1080p 67.500 60.000 148.500 +/+ ^ NOTE • For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack, • The interlace mode is not supported. • The set might operate abnormally if a non-standard video format is selected, • Separate and Composite modes are supported. SOG(Sync On Green) is not supported, English 23 [UC5100_Rus]BN68-02656H-00L04.indb 23 2010-03-24 ea 10:37:05 Advanced Features Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: • You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below. • You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the connection. See the diagram below, • Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don't have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. ^ You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. 24 English [UC5100_Rus]BN68-02656H-00L04.indb 24 2010-03-24 10:37:06 Network Setup (Auto) Network Setup (Manual) Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Connect your TV to your LAN as described in the previous section. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTER E button. Use the A or T button to select Network In the Setup menu, and then press the ENTERS button. The Network screen appears. Network | Net...

Herunterladen

Geben Sie zwei Ziffern: