Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Extender for DVI and RS232 Over One Fiber Optic Cable is a trademark of Gefen, LLC © 2011 Gefen, LLC, All Rights Reserved All trademarks are the property of their respective owners. Rev A2 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender unit Layout 5 Sender unit Descriptions 6 Receiver unit Layout 7 Receiver unit Descriptions 8 Connecting the Extender for DVI and RS232 Over One Fiber Optic Cable 8 Wiring Diagram 9 DIP Switch Configuration 9 Sender Unit 11 Receiver Unit 12 Calibration Procedure 12 Calibrating the Sender unit and Receiver unit 12 Troubleshooting Procedure 13 RS-232 Serial Control 14 Specifications 15 Warranty INTRODUCTION Congratulations on your purchase of the Extender for DVI and RS232 Over One Fiber Optic Cable. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and simple to operate. The Gefen Extender for DVI and RS232 Over One Fiber Optic Cable The Extender for DVI and RS232 over One Fiber Optic cable is a complete solution allowing DVI and RS-232 to be extended to a monitor, touch-screen display, or other DVI device up to 1640 feet (500 meters) from the source. A single strand SC fiber optic cable is used for the long distance extension, providing excellent protection from background electromagnetic interference (EMI), preserving both DVI and RS-232 signal integrity. Locking DVI, RS-232, and power connectors ensure secure connections. How It Works The Sender unit is placed near the DVI source and the Receiver unit near the Display. Connect the supplied DVI cable between the Sender unit and the DVI source. Connect a second DVI cable between the Receiver unit and the display. Connect the RS-232 cable from the RS-232 source to the Sender unit. Connect the RS-232 cable between the Receiver unit and the RS-232 connection on the display side. Connect a single strand of multi-mode SC-terminated fi ber optic cable between the Sender and Receiver unit. Connect the power supplies to both the Sender and Reciever unit. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR DVI AND RS232 OVER ONE FIBER OPTIC CABLE • When HDCP content is passed-through, DVI can only be extended up to 1000 feet (300 meters). • RS-232 data is bi-directional for direct commands and echo function or status information. See page 13 for information on RS-232 settings. IMPORTANT: Before connecting the power supplies to the Sender unit and the Receiver unit, see page 12 for information on calibrating the Extender. • When changing fiber optic cables, the calibration procedure must be repeated. 2 FEATURES Features • Extends DVI up to 1640 feet (500 meters) • Supports HD resolutions up to 1080p Full HD • Supports VESA resolutions up to 1920 x 1200 • RS-232 port for automation • Locking power supplies Package Includes (1) Sender unit (EXT-DVIRS232-1FOS) (1) Receiver unit (EXT-DVIRS232-1FOR) (1) 6 ft. Dual Link DVI cable (CAB-DVIC-DL-06MM) (1) 6 ft. RS-232 cable (CAB-DB9-6MF) (2) 5V / 2A DC Locking Power Supplies (EXT-PS52AULP) (1) Quick-Start Guide 3 SENDER UNIT LAYOUT Front 1 2 3 4 Back 5 6 4 SENDER UNIT DESCRIPTIONS 1 P (Power Indicator) This two-color LED will turn bright red once the included 5V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available wall outlet. This LED will turn bright green once the Sender unit and Receiver unit are communicating correctly. 2 C (Calibration Indicator) This LED will alternate from red to green during the calibration procedure. The LED will turn solid green once the calibration procedure has been completed. See page 12 for more information on the calibration procedure. 3 DVI In Connect a computer or other DVI source to this DVI port. 4 RS-232 Connect an RS-232 cable from this port to the controlling device. 5 Fiber This connector accepts a single strand of SC-terminated fiber optic cable that will link the Sender unit and Receiver unit together. The Gefen Extender for DVI and RS232 Over One Fiber Optic Cable will only accept multi-mode fi ber optic cables. 6 5V DC Connect the included 5V DC Locking Power Supply to this receptacle. 5 RECEIVER UNIT LAYOUT Front 4 1 2 3 Back 65 6 RECEIVER UNIT DESCRIPTIONS 1 RS-232 Connect an RS-232 cable from this port to the RS-232 device. 2 DVI Out Connect a DVI display to this DVI port. Calibration Indicator This LED will alternate from red to green during the calibration procedure. The LED will turn solid green once the calibration procedure has been completed. See page 12 for more information on the calibration procedure. 3 Power Indicator This two-color LED will turn brig...