Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Andrew Dateigröße: 319 kb Dateiname: 723a9275-2050-4549-bb72-d1b9272526c6.pdf Unterrichtssprache:

Printed in U.S.A. . 10500 West 153rd Street . 1315 Industrial Park Drive . Fax: +1-919-989-2200 . ECN 9006666 .. . Orland Park, IL U.S.A. 60462 Smithfield, NC 27577 USA Internet: 5/04 8000284-01 VSAT ANTENNA/LIMITED TWELVE (12) MONTH WARRANTY DATE DESCRIPTION REV. 2/26/90 Changed Pages 4, 6, 7, 8, 9 and 10. ECN 9001516 A 4/20/90 Changed Pages 3, 4, 5, 6, 7, 8, 9 & 10. ECN 9001550 B 9/10/90 Changed Cover, Pages 1, 6, 7, 12 & 13. ECN 9001616 C 11/19/90 Changed Cover, Pages 1, 3, 4, 5, 6, 7, 8, 0, 10, 11 & 13. ECN 9001665 D 11/4/91 Changed Cover, Pages 1, 2, 3, 4, 6 & 8-18. ECN 9001881 E 9/93 Changed Cover, Inside Front Cover, Pages 1, 4, 6, 7, 8, 9, 10 & 11. ECN 9002250 F 10/94 Changed Cover and Page 1. ECN 9002568 G 8/97 All Pages ECN 9003587 H 8/02 Changed Pages 4, 6, 10 & 12 ECN 9006120 J 9/02 Changed Pages 4, 6, & 10 ECN 9006205 K 5/04 ECN9006666 This ANDREW CORPORATION ® equipment is warranted to be free from in material and workmanship under normal use and service. ANDREW shall repair or replace equipment, at no charge, or at its option, refund if the equipment is returned to ANDREW not more than twelve (12) months after shipment. Removal or reinstallation of equipment and its transportation shall not be at the cost except ANDREW shall return repaired or replaced equipment freight prepaid. This Warranty shall not apply to equipment way so as to affect its stability or durability, or which has been subject to misuse, negligence or accident. This Warranty does not cover equipment which has been impaired by severe weather conditions such as excessive wind, ice, storms, lightning, or other natural occurrences over which ANDREWhas no control, and this Warranty shall not apply to equipment which has been operated or installed other than in accordance furnished by ANDREW. Claimants under this Warranty shall present their claims along with the defective equipment to ANDREW immediately upon failure. Noncompliance with any part of this claim procedure may invalidate this warranty in whole or in part. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER AGREEMENTS AND WARRANTIES, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. ANDREW DOES NOT AUTHORIZE ANY PERSON TO ASSUME FOR IT THE OBLIGATIONS CONTAINED IN THIS WARRANTY AND ANDREW NEITHER ASSUMES NOR AUTHORIZES ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE EQUIPMENT DELIVERED OR PROVIDED. IN NO EVENT SHALL ANDREW BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. In no event shall ANDREW be liable for damages in an amount greater than the purchase price of the equipment. Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. HARDWARE SORTER DANGER!! ! M6 x 30mm Hex Head Bolt M8 x 20mm Round Head Square Neck Bolt M4 x 12mm Phillips Head Screw M8 x 30mm Round Head Square Neck Bolt Washer, Flat - ..." x ..." OD M4 x 10mm Phillips Head Screw Washer, Flat - ..." x ..." OD Hardware illustrations are true size. Place actual hardware on top of illustration to identify. WATCH FOR WIRES! Installation near power lines is dangerous. For your own safety, follow these important safety rules. 1. Perform as many functions as possible on the ground. 2. Watch out for overhead power lines. Check the distance to the power lines before starting installation. We recommend you stay a minimum of 6 meters (20 feet) from all power lines. 3. Do not use metal ladders. 4. Do not install antenna or mast assembly on a windy day. 5. If you start to drop antenna or mast assembly, get away from it and let it fall. 6. If any part of the antenna or mast assembly comes in contact with a power line, call your local power company. DO NOT TRY TO REMOVE IT YOURSELF! They will remove it safely. 7. Make sure that the mast assembly is properly grounded. WARNING!!! Assembling dish antennas on windy days can be dangerous. Because of the antenna surface, even slight winds create strong forces. For example, a 1.0m antenna facing a wind of 32 km/h ( 20 mph) can undergo forces of 269 N (60 lbs). Be prepared to safely handle these forces at unexpected moments. Do not attempt to assemble, move or mount a dish on windy days or serious, even fatal accidents may occur. ANDREW is not responsible or liable for damage or injury resulting from antenna installations. INTRODUCTION This manual covers the installation of the ANDREW 1.0m & For best results in the assembly process, perform each step 1.2m SMC antenna system with AZ/EL cap mount and Ku- in the same sequence as listed in this manual. single polarity feed. ASSEMBLY TOOLS REQUIRED The following list of tools are those required for hand assembly and installation of the antenna. 1 - Ratch...

Herunterladen

Geben Sie zwei Ziffern: