Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Sven Dateigröße: 605.14 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sven  STL-3200

Use of an outdoors antenna is another option but you must ensure that a proper antenna type and positioning is applied for your location. The dealer staff or that of the service agent will recommend you the most adequate antenna for your area. High quality 75 Om coaxial cable is recommended for the best result. It can eliminate the interference caused by radio and miscellaneous waves. Close proximity between the antenna and power cable should be avoided; lightning prevention should be taken into account when installing the outdoor antenna. 20 4. FRONT PANEL AC power switch. Switch the power switch to “I” to connect the AC power, the AC power switch will then turn red. The switch used in 40” LCD is on the AC adapter? © “STAND BY” button. Once the AC power is switched on; the “Stand by” light will turn red indicating the receiver is in stand by mode. Press the “Stand by” button; then the indicator will turn blue, then the receiver comes into normal working state. Press the “Stand by” button again; and the receiver will return to “Stand by” mode. Oif you expect not to use the unit for a long period we suggest disconnecting the AC power cord to turn the receiver off completely because the power consumption is about 5 watts (26"), 5 watts (32”), 5watts (40") in stand by mode. When the 32 inches LCD television set is in the stand by mode or the temperature in this receiver has not reached the 55o,the cooling fans will not run. b “CH+” and “CH-” button. When the unit is receiving an analog TV signal, press the “CH+” or “CH-” button to select the program channels forwards or backwards. In the menu, press the “CH+” or “CH-” button to select the item that needs to be adjusted upwards or downwards. © “VOL+” and “VOL-” button. When the unit is receiving a TV signal, press the “VOL+” or “VOL-” button to adjust the volume of the speakers. Press the “VOL+” or “VOL-” button in the menu to adjust the selected items. ©“MENU” button. Press the “MENU” button to get into the menu; and also you could press this button several times to return to the other menu until you exit it. e “MODE” button. Press the “MODE” button continuously, “TV, AV, SCART, b~ S-Video, DVD Component and digital RGB, analog RGB” are the several program sources will be selected in turn. STAND BY CH+ ■ MODE 5. REMOTE CONTROL © “STAND BY” button: The function is the same as the power function of “Stand by” on the receiver button board. b “MUTE” button: Used for muting the speakers when this button is pressed. The mute symbol is displayed on the upper-right corner of the screen; pressed again to regain the sound and the mute symbol disappears. © “0-9” number button: Used for selecting “0~9” program number directly. © “I/II” button: Used for selecting sound mode directly. Press the button continuously and the symbols “Mono” - “Stereo” are displayed on the screen of the upper-right corner in turn. “I” stands for mono sound while “II” stands for stereo. In case of bilingual broadcast. Press “I/II” firstly to enter “Mono” mode; press “I/II” secondly to enter “Dual A” sound mode; press “I/II” thirdly to enter “Dual B” mode. ® “MODE/SUBCODE” button: Used for selecting the program sources. The program sources “TV’, “AV”, “SCART AV”,“S-Video”, “SCART RGB”, ‘YCbCr”, ‘YPbPr”, “digital RGB”, “analog RGB” are selected in sequence and the corresponding symbol is shown on the upper left corner of the screen when you press this button. The function is the same as the mode function of “MODE” on the receiver button board. © “CH+/CH-” button: Used for increasing or decreasing program channel number when viewing a TV program. Other functions are the same as the function of the “CH+” and “CH-” on the receiver button board. © “VOL+/VOL-” button: Used for adjusting the volume of the speaker. Other functions are the same as the function of the “VOL+” and “VOL-”button on the receiver button board. © “SLEEP” button: Press this button to display the Sleep Time frame, then press the [CH+] or [CH-] button to select the time. © “MENU” button: The function is the same as the function of “MENU” on the receiver button board. ®- ®- ©- MUTE o MODE/ STAN subcodesian PC ) BY K 1° 9 e o 0 Op © 0 ) JO ® SLEEP DISPLAY CD I/II ES O -- J- ■ VOL ME NU VOL L. OH- HOLD o SIZE Q- o o- 0 0 X q 0 AUTO 16:9 O Q A. SYS ARO Q Q— SXÆN* -© -© -© -© -© -® -® -® 21 j“AUTO” button: When the input is “analog RGB” (PC) or “digital RGB” (DVI) signal, the receiver will adjust the parameters of selected display format automatically to get the best effect when pressing this button. When the input is “1080i” signal, this button is useless. ® “ESC” button: Press this button to exit the menu when in the menu. © “ARC” button: Press this button, the image will turn to static; press again turn back. ® “DISPLAY” button: Press this button to display current broadcasting TV program number on the upper-right corner of the screen or to display program source ...

Herunterladen

Geben Sie zwei Ziffern: