Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Mitsubishi Electronics Dateigröße: 4.19 mb Dateiname: 3d2f00a9-3a87-41a3-b459-195cfa286ab5.pdf Unterrichtssprache:

Only one type of video cable should be connected. S-Video is recommended, if available. 6. For NetCommand® controlled recordings, connect a Video cable from VIDEO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 on the TV back panel. 7. Complete the NetCommand controlled recording connection by connecting a set of audio cables from AUDIO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. Additional connection cables are not provided with the TV. They are available at most electronic stores. IMPORTANT 18 VCR to a Cable Box Figure 6 A two-way RF splitter, 4 coaxial cables, right and left audio cables and an S-Video or Video cable are required. These are not included with the TV. 1. Connect the incoming cable to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the cable box back panel. 3. Connect one coaxial cable from OUT on the RF splitter to ANT-2 AUX on the TV back panel. 4. Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel. 5. Connect one coaxial cable from ANTENNA OUT on the VCR back panel to ANT-1 MAIN on the TV back panel. 6. To use the TV speakers with the VCR, connect a set of audio cables from AUDIO OUT on the VCR back panel to INPUT 1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white Figure 6. Connecting a VCR to a Cable Box TAL IO CableCARDTM SLOT S-VIDEO VIDEO AUDIOLEFT/ (MONO) AUDIORIGHT INPUT 1 2 AUDIO 2 Y Pb Pr AUDIOLEFT/ MONO) AUDIORIGHT S-Video recommended if available Attach only one cable type TV back panel 6. 5. ANT-2 AUX – (DTV/CABLE /VHF/UHF) – 7. S-VIDEO VIDEO AUDIOLEFT/ (MONO) AUDIORIGHT INPUT 1 2 ANT-1 MAIN IN OUT OUT TWO WAY SPLITTER Incoming Cable 1. 2. 3. MONITOR OUTPUT AUDIO/VIDEO 1 9. 3. 8. Cable Box back panel section IN OUT 2. 4. 9. HS-U748 VCR back panel If your VCR has a video channel or RF ON/OFF switch, set it to OFF. 7. 6. 7. 8. 5. 4. S-Video recommended if available White Red White Red White Red White Red Attach only one cable type Note: NetCommand® will assume your VCR is connected to inputs as shown here. If you use any other inputs for your VCR or add a second VCR this change must match in the NetCommand system. See Edit NetCommand... pages 35-42 for more information. Connecting VCR Video and Audio to a Cable Box cable connects to the L (left) channel. If your VCR is mono (non-stereo), connect only the white (left) cable. 7. Connect either an S-Video or Video cable from VIDEO OUT on the VCR back panel to INPUT 1 VIDEO on the TV back panel. Only one type of video cable should be connected. S-Video is recommended, if available. 8. For NetCommand® controlled recordings, connect a Video cable from VIDEO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 on the TV back panel. 9. Complete the NetCommand controlled recording connection by connecting a set of audio cables from AUDIO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. 19 For digital audio connections, see your A/V Receiver, DVD and Satellite Receiver Owner’s Guides. IMPORTANT A/V Receiver or Stereo System Figure 7 A digital audio cable and stereo audio cables are required. The digital audio cable is provided. The stereo audio cables are not included with the TV. 1. Connect a set of stereo audio cables from OUTPUT AUDIO 2 on the TV back panel to the TV AUDIO INPUT on the back of the A/V Receiver. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. To connect a digital A/V Receiver with Dolby® Digital surround sound: 2. Connect one end of the digital audio cable supplied with the TV to DIGITAL AUDIO on the back of the TV. Connect the other end to the COAXIAL DIGITAL INPUT on the back of the A/V Receiver. Check A/V Receiver’s Owner’s Guide for information concerning the use of the digital input and switching between the digital sound and analog stereo sound from the TV. ADJUSTMENTS. IR EMITTER NetCommand R ANT-1 MAIN CableCARDT LE /VHF/UHF) – INPUT 1 2 COM YPbPr (4 1 IN IN OUT IN OUT IN OUT IN OUT IN IN IN AUX CD TAPE 1 TAPE 2 VCR 1 VCR 2 TV DVD MONITOR VCR 1 VCR 2 TV DVD MONITOR VCR 1 VCR 2 TV DVD OUT OUT IN IN IN IN IN IN IN IN OUT OUT OUT OUT CENTER SUB WOOFER SUR. FRONT REC SOURCE LINE OUT PRE OUT SURROUND SPEAKERS (6. MIN.) FRONT SPEAKERS-A (6. MIN.) FRONT SPEAKERS-B (6. MIN.) CENTER (6. MIN.) L L L L L R R R R THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPE...

Herunterladen

Geben Sie zwei Ziffern: