Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Furuno Dateigröße: 931.79 kb Dateiname: 19b63ffc-e3f5-423b-94b4-d270046295a6.pdf Unterrichtssprache:

Printed in Japan N2 : OCT. 7, 2002 PUB. No. OME-43942 GP-1650F/1650DF (DAMI) SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Turn off the power immediately if water leaks into the equipment or the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Do not place liquid-filled containers on the top of the equipment. Fire or electrical shock can result if a liquid spills into the equipment. Do not operate the equipment with wet hands. Electrical shock can result. Keep heater away from equipment. Heat can alter equipment shape and melt the power cord, which can cause fire or electrical shock. CAUTION Do not use the equipment for other than its intended purpose. Use of the equipment as a stepping stool, for example, can result in personal injury or equipment damage. No one navigation device should ever be solely replied upon for the navigation of a vessel. Always confirm position against all available aids to navigation, for safety of vessel and crew. GPS position and velocity accuracies are controlled by the U.S. Department of Defense. Position may be degraded up to 100 meters. A warning label is attached to the equipment. Do not remove the label. If the label is missing or illegible, contact a FURUNO agent or dealer. WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011-0 Code No.: 100-236-230 About the TFT LCD The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The remaining 0.01% of the pixels may drop out or blink, however this is not an indication of malfunction. i TABLE OF CONTENTS FOREWORD ....................................... iv SYSTEM CONFIGURATION ....... v 1. OPERATIONAL OVERVIEW 1.1 Display Unit Controls ....................... 1-1 1.2 Inserting Mini Chart Card................. 1-2 1.3 Turning the Power On/Off ................ 1-2 1.4 Adjusting Tone and Brilliance .......... 1-3 1.5 Plotter Displays ................................ 1-3 1.6 Sounder Displays ............................ 1-4 1.7 Menu Operation, Soft Keys ............. 1-4 1.8 Demonstration Display .................... 1-5 2. VIDEO SOUNDER OPERATION 2.1 Principle of Operation ...................... 2-1 2.2 Sounder Display Description ........... 2-2 2.3 Plotter/Sounder Display ................... 2-4 2.4 Dual-frequency Display ................... 2-4 2.5 Automatic Sounder Operation ......... 2-5 2.6 Manual Sounder Operation ............. 2-5 2.7 Measuring Depth ............................. 2-6 2.8 Suppressing Interference ................ 2-7 2.9 Suppressing Low Level Noise ......... 2-7 2.10 Erasing Weak Echoes ..................... 2-8 2.11 White Marker ................................... 2-8 2.12 Selecting Picture Advance Speed ... 2-9 2.13 Selecting Background and Echo Colors .............................................. 2-9 2.14 Alarms ............................................ 2-10 2.15 Interpreting the Display...................2-11 3. PLOTTER DISPLAYS 3.1 Presentation Modes ......................... 3-1 3.2 Cursor .............................................. 3-2 3.3 Shifting the Display .......................... 3-2 3.4 Selecting Chart Scale/Range .......... 3-2 3.5 Mini Chart Cards .............................. 3-2 3.6 Navigation Data Display .................. 3-5 3.7 Steering Display .............................. 3-6 3.8 Highway Display .............................. 3-7 3.9 Changing Operation Mode .............. 3-8 3.10 Navigation Trip Distance ................. 3-8 4. TRACK 4.1 Displaying Track .............................. 4-1 4.2 Stopping/Restarting Plotting of Track ................................................ 4-2 4.3 Changing Track Color ...................... 4-2 4.4 Track Plotting Method, Interval ........ 4-2 4.5 Changing Track Memory Capacity .. 4-3 4.6 Erasing All Track .............................. 4-4 5. MARK 5.1 Entering Mark .................................. 5-1 5.2 Changing Mark Attributes ................ 5-2 5.3 Changing Mark Size ........................ 5-3 5.4 Erasing Marks .................................. 5-4 5.5 Displaying Track and Mark Points ... 5-4 6. WAYPOINTS 6.1 Entering Waypoints.......................... 6-1 6.2 Erasing Individual Waypoints .......... 6-4 6.3 Changing Waypoint Data ................. 6-4 6.4 Waypoint Mark Size ......................... 6-5 6.5 Changing Waypoint Position on the Plotter Display ........................... 6-5 6.6 Searching Waypoints ....................... 6-5 7. ROUTES 7.1 Entering Routes ............................... 7-1 7.2 Connecting Routes .......................... 7-2 7.3 Inserting, ...

Herunterladen

Geben Sie zwei Ziffern: