Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Hitachi Dateigröße: 765.74 kb Dateiname: 91349f9e-ae27-45c3-80d6-0a3fc753c734.pdf Unterrichtssprache:

ANT IN Variable Audio Out Used to connect either an external amplifier, or add a sub-woofer to your surround sound system. Y, Pb, Pr PC and HD-STB Audio Connecting cables to your TV. Input Used for audio connections from a PC source or HD-STB Satellite system. RF Connector: Antenna Used to connect analog cable or antenna signals to the television, either directly or through your cable box. S-VIDEO In A connection available with some high-end equipment that provides even better picture quality for Video 2. Video 1 or 2 Connects the video signals from various types of equipment. Left/Right Audio Used for stereo sound from various types of equipment. Monitor Out Connects to a second TV or Monitor. Audio Center Mode IN Connect to external Dolby Digital Center “preamp output.” Mini glossary JACK A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color- coded. SIGNAL Picture and sound traveling through cable, or over the air, to your television screen. PAGE 7 Front Connection Panel Front Connection Panel There are four jacks on the left front side behind the screen on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front connection panel. To use the front jacks as the signal source, select them using Main Source menu as described on page 22. They will be named “Front Video” in the Main Source menu. When you select Front Video or Front S-Video, the Front audio inputs are automatically selected as well. If you’re connecting a video game device, make sure to change the picture settings with the EZ Video option in the Video menu (see page 29). Front A/V Panel S-VIDEOVIDEO FRONT A/V AUDIO L/MONOR Left/Right Audio Used for stereo sound from various types of equipment. Video Connects the video signals from any piece of equipment. S-Video A connection available on some very high-end equipment that provides better picture quality than video input. Mini glossary A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo playback of videocassettes and for higher quality picture and sound from other A/V devices. A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television). PAGE 8 ANT / Cable Service Hookup ANT / Cable Service Hookup Cable TV Wall jack 1 2 Antenna Connect an antenna and/or cable service to your TV as shown. RF coaxial wire (75 ohm) Turn to page 26 to do a channel search with EZ Scan for Ant/Cable connection(s). RF coaxial wire (75 ohm) MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 . ANT IN If you receive your RF signal through an antenna that is several years old and connects with two small prongs, you will need to purchase a 300 to 75 ohm adapter. It should be available from your local electronics dealer. It recommends using a 75 ohm cable for your antenna connections in order to prevent interference. For best signal reception, it is recommended to have your Antenna professionally adjusted. PAGE 9 Cable Box Connections Cable Box Connections 1 Cable TV Locate the output jack on the back of Wall jack your cable box. Connect this to the Antenna jack on the back of your TV. Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions provided with your equipment. This can be combined with any other equipment you may want to hook up. In Output Switch Out 3 4 MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 . ANT IN Audio TV VCR L R Video RF coaxial wire (75 ohm) Cable box If you’re using a cable box, leave the TV on channel 3 or 4 and use your cable box to change channels. PAGE 10 VCR Connections VCR Connections 1 Locate the Antenna jack on the back of your TV. Connect this to out jack on the back of your VCR. Or find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment. You may connect either the composite video or the S-Video cables to your TV. (Do not connect BOTH the composite and the S- Video cables. In the event that you connect both composite and the S- Video cables, only the S-Video will work.) Cable TV Wall jack MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 . ANT IN In Out Audio L R Video 3 4 S-Video Output Switch Antenna RF coaxial wire (75 ohm) Round wire (75 ohm) A/V cables not included with TV VCR Back AV panel To hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV. If you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the...

Herunterladen

Geben Sie zwei Ziffern: