Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Samsung Dateigröße: 40.15 mb Dateiname: Samsung-LE32C650L-LE37C650L-LE40C650L-LE46C650L-LE55B650L-LE32C652L-LE40C652L-LE46C652L-LE32C653M-LE40C6543M-LE46C6532M-LE32C654M-LE40C6504M-LE46C6543M-Pdf-Rus.Pdf Unterrichtssprache:

^ Because the booting times of applications differ, you may have to wait for approximately 2 minutes. ^ If the LAN cable connected the WAN port of AP during Samsung Auto Configuration, you are able to complete until Internet connection test. If you do not connect, Samsung Auto configuration will check only device connecting of AP (Not check Internet). 2. After 2 minutes, connect the Samsung Wireless LAN Adaptor to the TV. When the Samsung Wireless LAN Adaptor is established, the pop-up window appears. 3. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adaptor giving a gap no larger than 25cm. 4. Wait until the connection is automatically established. ^ If the connection fails, reset the AP and then try again. ^ If Samsung Auto Configuration does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual. 5. After the connection is established, locate the sharer at the desired location. ^ If the AP settings have been changed or it is the first time you use the new AP after purchase, you need to set up again beginning from Step 1. Network Setup (PBC (WPS)) How to set up using PBC (WPS) If your router has a PBC (WPS) button, follow these steps: 1. Connect your TV to your LAN as described in the previous section. 2. Turn on your TV, press the MENU button on your remote, use the Aor^ button to select Setup, and then press the ENTERS button. 3. Use the Aor^ button to select Network in the Setup menu, and then press the ENTERS button. 4. On the Network screen, select Network Type. 5. Set Network Type to Wireless. 6. Select Network Setup. The Network Setup screen appears. | Select a network : Not Selected ► Internet Protocol Setup : Auto IP Address : ■ Subnet Mask : ■ Gateway : DNS : Auto DNS Server : ■ ■ ■ ■ U Move E Enter R Return 7. Press the Red button on your remote. 8. Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network. 9. After the network connection is set up, press the RETURN button to exit the Network Setup screen. Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. How to set up automatically To set up the wireless connection automatically, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up PBC (WPS)" above. 2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTERS button. Press the A or ▼ button to select Auto, and then press the ENTERS button. Network Setu 26 English 3. Press the A button to go to Select a Network, and then press the ENTERS button. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the A or ▼ button to select a network, and then press the ENTERS button. ^ If the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Na me (SSID) and Security Key to establish the connection. 5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10. 6. Press the A or ▼ button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears. Security Key 0 entered -A -B -C -D -E -F -G 0~9 Number _H _I _J _K _L_ _M _N □ Lower case -O -P -Q -R -S -T -U |b Delete V W X Y Z |c Space n Move S Enter R Return 7. On the Security screen, enter your network’s Pass Phrase. ^ You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. 8. To enter the Pass Phrase, follow these general directions: - Press the number buttons on your remote to enter numbers. - Use the direction buttons on your remote to move from button to button on the Security Key screen. - Press the Red button to change case or display symbols/characters. - To a enter letter or symbol, move to the letter or symbol, and then press the ENTERS button. - To delete the last letter or number you entered, press the Green button on your remote. 9. When done, press the Blue button on your remote. The Network Connecting screen appears. 10. Wait until the connection confirmation message is displayed, and then pre...

Herunterladen

Geben Sie zwei Ziffern: