Stimmen - 13, Durchschnittliche Bewertung: 3.9
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Fernseher - LE20S81B (6.33 mb)
Fernseher - LE20S81B (8.45 mb)
Anleitung Zusammenfassung
While the head phone is connected, the sound from the built-in speakers will be disabled. O Connecting Set-Top Box, VCR or DVD - Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD. - If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set. G Connecting Computer - Connect the D- Sub cable (optional) to “PC IN (PC)” on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to “PC IN (AUDIO)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer. © Kensington Lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model. English - 4 Viewing the Remote Control O Television Standby button G Number buttons for direct channel access Q One/Two-digit channel selection O ®: Volume increase ©: Volume decrease G Temporary sound switch-off © Selects the TV mode directly 7 Displays the main on-screen menu 8 Sound effect selection ! Previous channel @ P©: Next channel P©: Previous channel # Available source selection $ Use to see information on the current broadcast % Exit the on-screen menu 0 Control the cursor in the menu & Automatic Power-off ( Picture effect selection ) Sound mode selection Teletext Functions Q Teletext hold © Exit from the teletext display 7 Teletext index 8 Teletext sub page 9 Teletext display/mix both teletext information and the normal broadcast 0 Fastext topic selection © P ®: Teletext next page P ©: Teletext previous page # Teletext mode selection (LIST/FLOF) $ Teletext reveal & Teletext store * Teletext size selection ^ The performance of the remote control may be affected by bright light. ^ For details, refer to further instructions. English - 5 Installing Batteries in the Remote Control 1. Slide the cover out completely. 2. Install two AAA size batteries. ^ Make sure to match the “+” and “-” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. ^ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.) ^ If the remote control doesn't work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. ^The standby indicator lights up on the front of the set. 2. Press the POWER (!) button on the front of the set. ^The programme that you were watching last is reselected automatically 3. Press the numeric button (0~9) or channel up/down (® / ©) button on the remote control or < c/p.® >button on the lower-right panel. ^ When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed. 4. To switch your set off, press the POWERS) button again. Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the POWER (1) button on the remote control. ^The screen is turned off and a standby indicator appears on the front of your set. 2. To switch your set back on, simply press the POWER (1), numeric buttons (0~9) or channel up/down (® / ©) button again. ^ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. Plug & Play 1 When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER (!) button on the remote control. The message “Запуск Plug & Play” is displayed with “OK” selected. Press the ENTER < button. 2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER < button to confirm your choice. 3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER < button. ^ Please check that the antenna cable is connected correctly English - 6 4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER < button to confirm your choice. 5. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER - button. ^ The channel search will start and ...