Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Press again to restore the sound. qs Adjusting TV volume: Press to adjust the volume of the TV. qd Displaying the menu system: Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen. qf Selecting TV mode: Press to switch off teletext or video input. qg Selecting Picture mode: Press repeatedly to change the picture mode. qh Selecting Sound mode: Press repeatedly to change the sound mode. qj Displaying on Screen information: Press to display all on-screen indications. Press again to cancel. GB Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual. Overview 5 Overview of TV Buttons Pull open the door on the side of the TV to reveal the sockets Programme Up or Down Buttons (Selects TV channels) Volume control buttons Auto Start Up Button Video Input jack Audio Input jacks Headphones jack Inserting Batteries into the Remote Control Make sure you insert the supplied batteries observing the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Connecting the Aerial and VCR Connecting cables are not supplied. &1/-Q1 &2/-0Z »1/-S1 S>2/-€ Scart lead is optional For more details of VCR connection, please refer to the section “Connecting Optional Equipment” of this instruction manual. 6 Overview-Installation Switching on the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) adjust the picture slant 4) search for and store all available channels (TV Broadcasts) and 5) change the order in which the channels (TV Broadcasts) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the Q (Set Up menu) or by pressing the Auto Start Up Button Iffl] on the TV set. 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz). Press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu appears automatically on the TV screen. 2 Press the ♦ or V button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language. Iv Svenska Norsk English Nederlands Frangais Italiano m ▼_ Select Language: Language O O GB 3 The Country menu appears automatically on the TV screen. Press the ♦ or V button to select the country in which you will operate the TV set, then press the OK button to confirm your selection. • If the country in which you want to use the TV set does not appear in the list, select “-” instead of a country. • In order to avoid wrong teletext characters for Cyrillic languages we recommend you select Russia as the country if your own country does not appear in the list. 4 Because of the earth’s magnetism, the picture might slant. The Picture Rotation menu allows you to correct the picture slant if it is necessary. a) If it is not necessary, press the ♦ or V button to select Not necessary and press Ok. b) If it is necessary, press the ♦ or V button to select Adjust now, then press OK and correct any slant of the picture between -5 and +5 by pressing the ♦ or V button. Finally press OK to store. Country Sverige Norge Italia Deutschland Österreich !▼_ Select country: If picture slants, please adjust picture rotation Not necessary Adjust now © continued... First Time Operation 7 Switching on the TV and Automatically Tuning 5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes. 6 The TV starts to automatically search and store all available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 6) and press OK. The auto tuning process starts again. 7 After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. a) If you wish to keep the broadcast channels in their tuned order, go to step 8. b) If you wish to store the channels in a different order: 1 Press the ♦ or V button to select the programme number that has the channel (TV Broadcast) you wish to rearrange, then press the b button. 2 Press the ♦ or V button to select the new programme number position for your selected channel (TV Broadcast), then press the B button. 3 Repeat steps b)1 and b)2 if you wish to change the order of the othe...
Dieses Handbuch ist für folgende Modelle:Fernseher - KV-32CS71 (12.87 mb)