Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
-- Misspelling in captions • Error committed by the closed captioning production company. • Possible in a live broadcast. Not in case of a prerecorded program. -- Text is not shown in its entirety or a delay occurs from what is being said • A few seconds of delay is common for live broadcast. If a dialogue exceeds the display capacity (220 words per minute), selective editing is used so that the captions remain up-to-date with the current TV screen dialogue. -Captions scrambled with white boxes • Caused by interferences of building, power lines, thunderstorms, etc. -No captions in a program which must contain closed caption • The broadcast may use a time compression process to speed up the program. The decoder cannot read the compressed information and captions will be lost. -No captions in a pre-recorded videotape with indicated closed captions included • Possibility of a illegal copy or an erroneous copying process accidentally performed by the fabricator. -Black box in the TV screen • You are in TEXT mode. Select CAPTION mode or "OFF". 10 EN SYMPTOM POSSIBLE REMEDY PAGE DVD mode No picture • This unit cannot play DVD-RAM/CD-i/Photo CD/Video CD/DVD with region codes other than "1" and "ALL". 14 Disc cannot be played • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental setting or change the control level. 26 15 22 No sound • Correct the audio output settings. 22 No DTS audio is output • This unit does not support DTS audio. This is not a malfunction. -Distorted picture • During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction. • This happens right after fast forwarding or rewinding. -- Audio or subtitle language does not match the setting • The selected language is not available for audio or subtitle on the DVD. 21 -The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera angles. 17 Audio or subtitle language cannot be changed • The DVD does not contain audio source or subtitles in the selected language. 21 "Prohibited icon" appears on the screen • That operation is not available by the unit or the disc. 15 CD/DVD sound dropout No CD/DVD reproduction DVD picture poor • Scratched disc. Replace with an unscratched one. - NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations. • Playback from a desired track and random playback are not available during playback. TROUBLESHOOTING EN MAINTENANCE MAINTENANCE DEGAUSSING A degaussing circuit in this unit clears up color errors on the TV screen. Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in. If you see minor color errors on the screen, unplug the unit for approximately 30 minutes. When you plug the unit again, the degaussing circuit will operate to clear errors. Take this step any time the TV screen is accidentally magnetized or when you move the unit. IF THE LASER OPTICAL PICKUP UNIT IS DIRTY • If the unit still does not perform properly when it is operated, while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. CABINET CLEANING • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. •Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. SERVICING • Should your unit become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center. IR SIGNAL CHECK Use the AM radio or the digital camera to check if the remote control properly sends out the infrared signal. It will help to define the cause of malfunction. Using AM radio •Tune the AM radio to no broadcasting band. Press any button on remote control toward the radio. If the radio receives the signal from remote control properly, the sound will flutter. Using digital camera (including built-in camera of cellular phone) • Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared light through the digital camera. DISC HANDLING • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. •To clean-off, use a soft cloth. • Do not use a hard cloth since this will mar the disc. • Wipe the disc in a straight line from center to ...