Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: FUNAI Dateigröße: 376.59 kb Dateiname: e451e14b-d4a4-44d0-8034-d9bb539339d9.pdf Unterrichtssprache:

When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time. NOTE: When you shift forward the time schedule during recording, the recording speed will automati cally be set to the SLP mode. 5)Press the F.FWD/B or REW/s button to exit the setting menu. Then press the MENU button on the remote control to return to original mode. TO CORRECT A PROGRAM • While setting a program; press the REW/s button to go back one step and enter the correct numbers using the PLAY/K or STOP/L button. • After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21. 3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button. 4)Press the POWER button to set automatic timer recording. CH DATE Press the PLAY/K or STOP/L but - --/- -- - - --/- -- - ton until the desired hour appears. - --/- -- - 61 7/04 FRI - --/- -- - (Example: “ 7, PM” for 7:30PM) B - --/- -- - - --/- -- - - --/- -- - Then, press the F.FWD/B button. BEGIN END -:- --:- -- -:- --:- -- -:- -- -:- -- -:- 7:12PM -:- -- -:- --:- -- -:- --:- -- -:- --:- -- 6 Set beginning minute Press the PLAY/K or STOP/L but- ton until the desired minute appears. (Example: “30” for 7:30PM) Then, press the F.FWD/B button. – TIMER PROGRAMMING – CH DATE BEGIN END - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- -- - B 61 7/04 FRI 7:30PM - - - --/- -- - --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - 7 Set end hour Press the PLAY/K or STOP/L but- ton until the desired hour appears. (Example: “8, PM” for 8:50PM) Then, press the F.FWD/B button. – TIMER PROGRAMMING – CH DATE BEGIN END - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - B 61 7/04 FRI 7:30P8:30PM - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - CH DATE Press the PLAY/K or STOP/L but - --/- -- - - --/- -- - ton until the desired minute appears. - --/- -- - B 61 7/04 FRI - --/- -- - - --/- -- - - --/- -- - Then, press the F.FWD/B button. - --/- -- - (Example: “50” for 8:50PM) 8 Set end minute – TIMER PROGRAMMING – BEGIN END -:- --:- -- -:- --:- -- -:- -:- - P- 7: 30PM 8:50M- -:- -:- -- -:- --:- -- -:- --:- -- -:- --:- -- 9 Set the tape speed Press the PLAY/K or STOP/L but- ton until the desired tape speed appears. (Example: SP) – TIMER PROGRAMMING – CH DATE BEGIN END - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - B 61 7/04 FRI 7:30PM 8:50MPSP - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - 22-EN 9I03 TO CANCEL AN AUTOMATIC TIMER RECORDING • After setting a program; 1)Press the POWER button. 2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. • While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of programs appear on the TV screen. 5)Press the MENU button on the remote control to return to TV mode. HINTS FOR AUTOMATIC TIMER RECORDING • Make sure the channel you want to record is properly set in advance. • It is not necessary to press the RECORD button for timer recording. • Recording begins automatically at the Start time. • If you are recording using a Timer mode, you may not operate the unit manually. • The erase-prevention tab on the cassette must be in place (or you must put tape over the hole). • If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off. • If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected. AUTO RETURN With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically. – M E N U – 1 Select “USER’S SET UP” TIMER PROGRAMMING PICTURE CONTROL Press the MENU button on the SETTING CLOCK CHANNEL SET UP B USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] remote control. CAPTION [OFF] ZERO RETURN TIME SEARCH Press the PLAY/K or STOP/L button to point to “USER’S SET UP”. Then, press the F.FWD/B button. 2 Set “AUTO RETURN” to [ON] Press the PLAY/K or STOP/L but ton to point to “AUTO RETURN”. Press the F.FWD/B or REW/s button until [ON] appears. – USER’S SET UP – RENTAL [OFF] [OFF]REPEAT PLAY B AUTO RETURN [ON] 3 Auto Return will begin When all the timer recordings are completed, the TV/VCR...

Herunterladen

Geben Sie zwei Ziffern: