Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Then, press the CONTROL + or - button to select the mode you wish. Connect the power cord to a standard AC outlet. : Press CONTROL + button. : Press CONTROL - button. Press the POWER button to ON. Channel "1" (CATV mode) displays LIGHT RED. in TV/CATV AUTO MEMO CCD SELECT CCD OFF TV/CATV AUTO MEMO CCD SELECT CAPTION C1 TV/CATV AUTO MEMO CCD SELECT CAPTION C2 Press MENU button so that the menu display appears on the TV screen. TV/CATV Press the CONTROL + or - button. The mode selected will light up in LIGHT RED • Select the TV mode if you have an Antenna connected to the TV. • Select the CATV mode if you have CABLE TV connected to the TV. ► TV/CATV AUTO MEMO CCD SELECT CCD OFF TV/CATV TV/CATV AUTO MEMO AUTO MEMO ► CCD SELECT KSBMKSe ► CCD SELECT TEXT C2 TEXT C1 Press PICTURE button. AUTO MEMO Press the MENU button once or repeatedly so that AUTO MEMO is selected on the screen. Then, press the CONTROL + or - button to start automatic channel memorizing. TV/CATV AUTO MEMO CCD SELECT CCD OFF -] GAME [+] PICTURE ADJUSTMENT Select the feature you wish to adjust with the PICTURE button and adjust it with the CONTROL + or - button. m GAME Adjust to the most suitable position for TV • When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. • It can be cancelled by pressing the CONTROL + or - button during the Auto memo mode. 1 6 | ADD/DELETE Use the CHANNEL A/Y or number buttons to select the channel you wish to put into memory or to erase from memory. • Press the ADD/DELETE button to light up in LIGHT BLUE if you wish to add the channel into memory. • Press the ADD/DELETE button to 1 ight up in LIGHT RED if you wish to erase the channel from memory. Notes: • When you press the CHANNEL A and ▼ buttons before selecting AUTO MEMO, tuner stops at 1 st available channel. (SEARCH MODE) • When you press the CHANNEL A and ▼ buttons after selecting AUTO MEMO, tuner stops at the memorized channels only. (SKIP MODE) To clear menu display: Press MENU button once or repeatedly until menu disappears from the TV screen. from the TV screen after a few seconds even though you may not be finished. Press PICTURE button repeatedly until the display returns to the screen. Note: When you disconnect the unit from the AC outlet, or if you have a power failure, all memory, such as channel program, sleep time, will be lost. You must then repeat each preset procedure by using the menu function. REMOTE CONTROL OPERATION Some TV controls can only be adjusted by using the remote control. POWER Press to turn the TV ON and OFF m MUTE Press the MUTE button to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOLUME a/V to restore sound. m DISPLAY Press to display the channel number on the screen. If you press it again, the channel number will disappear. 4 RECALL Press this button to go back to the previously viewed channel. For example, pressing the RECALL button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3. CHANNEL Press A or ▼ to select memorized channel. 6 CONTROL +/- Press to adjust the menu or picture control. 1 2 a MUTE О 1 1 з-ООО 4 5 6 ООО 7 8 в a Г~1 Г—I 12 m MENU Press to display the menu on the TV screen. (See "CHANNEL PRESETTING" and "CCD (Closed Caption Decoder)".) m ADD/DELETE Press to add desired channel, and to erase memorized channel. SLEEP Press the SLEEP button to display the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0,90,80,70,.....10 minutes) 10 PICTURE Press to display picture control menu on the TV screen. (See "PICTURE ADJUSTMENT".) 11 VOLUME Press A or 1 to control the volume level. 12 CHANNEL NUMBER Press two digits to directly access the desired channel. Remember to press a ”0" before a single digit channel. +100 Press to select cable channels which are equal or greater than number 100. INSTALLING THE BATTERIES SPECIFICATIONS GENERAL SPECIFICATIONS | 1 OTHER SPECIFICATIONS Television system : NTSC-M Remote control : Digital encoded TV Standard infrared light system Closed Caption Operating System :§15.119/FCC temperature : 5°C to 40°C Channel coverage (41°F ~104°F) VHF : 2 ~ 13 Power UHF : 14-69 requirements : AC 120V, 60Hz CATV : 2 ~ 13, A - W, Power consumption W+l - W+84, (Maximum) : 85W A-5-A-1, 5A Picture tube : 19" Tuning System : 181 channel Dimensions H :16-3/4"(424mm) frequency synthesized W: 18-3/4" (475mm) tuning system D : 18"(454mm) Channel access : Direct access keyboard, Weight : 371bs (16.7kg) programmable Accessories : Remote Control unit scan and up/down with 2"AA"batteries Antenna terminals : VHF/UHF/CATV : Owner’s Manual 75 ohm unbalanced (F-type) * De...