Stimmen - 3, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
NOTE: .If you like to repeat the current track in the random selection, press [REPEAT] several times until “ TRACK” appears during playback. If you like to repeat the entire random selection press [REPEAT] several times until “ ALL” appears during playback. -23- EN CHANGING THE SETTINGS STEREO SOUND MODE SUBTITLE LANGUAGE DVD-V CD The unit allows you to select a language for subtitles during DVD disc (if available) playback. 1 Press [SUBTITLE] during playback. .The subtitle language will appear on the display bar at the top of the TV screen. 2 Press [SUBTITLE] repeatedly to select your desired subtitle language. 3 To turn off subtitles, press [SUBTITLE] repeatedly until “OFF” appears. NOTES: .Pressing [SUBTITLE] may not work on some DVDs with multiple subtitle languages. In this case, set it on the disc menu. (Operation varies between discs. Refer to the manual of the disc.) .If the desired language is not shown after pressing [SUBTITLE] several times, the disc does not have subtitles in that language. .When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is recorded on the scene. NOT AVAILABLE .If you choose a language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, “---” will be displayed instead. (Refer to page 26.) 1 Press [AUDIO] repeatedly during playback to select between “STEREO”, “L-ch” or “R-ch”. .STEREO - both right and left channels are active (stereo) L-ch - only left channel is active R-ch - only right channel is active CAMERA ANGLE DVD-V Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the “ ” icon appears on the screen. 1 Press [ANGLE] during playback. .The selected angle will be displayed on the display bar at the top of the screen. .If the “ANGLE ICON” setting is “OFF” in the “OTHERS” menu, the “ ” icon will not appear. (Refer to page 28.) 2 Press [ANGLE] repeatedly to select your desired angle. BLACK LEVEL SETTING AUDIO LANGUAGE DVD-V The unit allows you to select a language during DVD disc (if multi languages are available) playback. 1 Press [AUDIO] during playback. 1.ENG Dolby D 3/2.1ch 48k/3 2 Press [AUDIO] repeatedly to select your desired language. NOTE: .Pressing [AUDIO] may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). DVD-V Adjust the Black Level Settings to make the black parts of the picture brighter. 1 Press [MODE] during playback. 2 Press [ENTER] to switch “ON/OFF”. ON: Makes the dark parts brighter. OFF: Shows the original picture as recorded. (Initial setting) 3 Press [MODE] twice or [RETURN] to exit. NOTE: .The setting will be saved even if the unit is turned off. - 24- EN VIRTUAL SURROUND You can enjoy surround-sound effect over two speakers on this unit. DVD-V CD 1 Press [MODE] twice (CD: once) during playback. OFF 2 Press [ENTER] to set it “1” (Natural effect), “2” (Emphasized effect) or “OFF”. 3 Press [MODE] to exit. .You can also exit the menu by pressing [RETURN]. NOTE: (for CD play only) .Virtual Surround will not be effective if the sound mode is set to something other than STEREO. THE ON-SCREEN INFORMATION You can check the information about the current disc by pressing [DISPLAY]. DVD-V CD For DVD-Vs 1 Press [DISPLAY] during playback to show current Chapter. .The elapsed and remaining playing time of the current chapter will be displayed. 9/49 0:00:00 -0:03:30 2 Press [DISPLAY] again to show current Title. .The elapsed and remaining playing time of the current title will be displayed. 1/3 0:00:00 - 1:23:45 3 Press [DISPLAY] again. .The bit rate and the current repeat setting will be displayed. T L1 .If you are playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is playing. L1: Layer 1 is playing). 4 Press [DISPLAY] again to exit. For Audio CDs 1 Press [DISPLAY] during playback to show the current Track. .The elapsed and remaining playing time of the current track will be displayed. 4/12 0:03:21 - 0:02:15 T 2 Press [DISPLAY] again to show current Total Track. .The elapsed and remaining playing time of the total track will be displayed. 4/12 0:13:45 - 0:45:40 T 3 Press [DISPLAY] again to exit. NOTE: .When you are playing a disc in PROGRAM or RANDOM mode, “ PROGRAM” (or RANDOM) will be displayed at step 2. PROGRAM B - 25- EN CHANGING THE DVD SET UP ITEMS CUSTOM MENU DVD-V You can change the DVD player’s settings. 1 Press [SETUP] twice in the stop mode so that the DVD SETUP menu appears. .Press [L] to select “CUSTOM” then press [ENTER]. NOTE: SETUP QUICK CUSTOM INITIALIZE .If the menu does not appear, press [PLAY O] first, then press [STOP C]. Make sure the disc is in the stop mode, then slowly press [SETUP] twice. 2 Select the desired item. .Press [K KK/L LL] to select the desired item then press [ENTER] to confirm. Refer to the pages below to set up each item. SETUP CUSTOM LANGUA...