Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
This is normal. 3)Press the PLAY button to return to normal speed. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press the COUNTER RESET button repeatedly. 3 Begin recording or playback Press the RECORD or PLAY button. Press the STOP button when recording or playback is completed. 4 To activate “ZERO RETURN” mode Press the MENU button on the – M E N U – remote control. TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Press the PLAY/K or STOP/L but- CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] B ZERO RETURN TIME SEARCH ton to point to “ZERO RETURN”. Then, press the F.FWD/B button. The counter will appear on the TV screen. The tape will automatically stop when the counter returns to 0:00:00. TIME SEARCH The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: • Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction. 1 Insert a tape. 2 Select “TIME SEARCH” mode Press the TIME SEARCH button (with each push it will increase by 10 minute). 3 Enter your desired time TIME SEARCH2 : 50 Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes) If you wish to cancel the Time Search at this point, press the MENU button on the remote control. 4 Begin Time Search By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time. STILL PICTURE You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLAY button to return to playback. NOTES: • Usually there will be video “noise” lines (black and white streaks or dots) on the screen. This is normal. If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the “noise” lines. This is not a fault of the machine, but is a by- product of the technology involved in producing a TV/VCR with 2 video heads. • If it is left in the Still mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode. - 17-EN 9J27 NOISE CANCEL (in the Still mode) RENTAL PLAYBACK This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal. VERTICAL HOLD CONTROL In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”. TRACKING ADJUSTMENT • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN TIME SEARCH 1 Select “USER’S SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “USER’S SET UP”. Then, press the F.FWD/B button. 2 Set “RENTAL” to [ON] Press the PLAY/K or STOP/L but ton to point to “RENTAL”. Press the F.FWD/B or REW/s button until [ON] appears. 3 Exit the Rental setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start playback. “RENTAL PLAY B” appears. • Once you...