Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
To do that: 1 After selecting the "Manual Programme Preset" option, press ^ then with Programme option highlighted press ^. Press ♦ or ♦ to select on which programme number you want to preset the channel (for VCR, select programme number "0"). Then press ^. 2 After selecting the System option, press ^. Then press ♦ or ♦ to select the TV Broadcast system (B/G for western European countries or D/K for eastern European countries). Then press ^. continued... 10 I Menu System Level 1 Level 2 Level 3 / Function 3 After selecting the Channel option, press ^. Then press ♦ or ♦ to select the channel tuning ("C" for terrestrial channels or "S" for cable channels). Next press ^. After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press ♦ or ♦ to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. b)Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press ^. Next press ♦ or ♦ to adjust the fine tuning between -15 and +15. Finally press OK twice to store. c) Skip any unwanted programme numbers when they are selected with the PROGR +/-buttons. To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press ^. Next press ♦ or ♦ to select Yes. Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. d) Label a channel using up to five characters. To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press ^. Next press ♦ or ♦ to select a letter, number or "-" for a blank. Press ^to confirm this character. Select the other four characters in the same way. After selecting all the characters, press OK twice to store. continued... Menu System 111 Level 1 Level 2 Level 3 / Function PARENTAL LOCK The "Parental Lock" option in the "Advanced Features" menu allows you to lock the buttons of the TV set. In this way after this option is selected and the TV set is switched off, the buttons on the TV do not work and the TV only works by using the remote control buttons. To do that: after selecting the option, press ^. Then press ♦ or ♦ to select On. Press OK to confirm and store and finally press l/Dieses Handbuch ist für folgende Modelle:
Fernseher - KV-21FT1K (11.48 mb)