|
Anleitung Zusammenfassung
Change the PIN code lock setting Use the Point 7 8 buttons to switch between the options. Change the PIN code Setting Fan This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22). L1....... Normal operation L2....... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan control Choose the running speed of cooling fans from the following options. Normal ..... Normal speed Max.......... Faster than the normal speed. Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. .Note: •When the Factory default function is executed, all the warning log records will be deleted. Lamp counter This function is used to reset the lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement icon (Fig.1) will appear on the screen, indicating that the end of lamp life is approaching. When the lamp life is left 0 hour, the Lamp replacement icon (Fig.2) will appear on the screen, indicating that the end of lamp life is reached. When replacing the projection lamp, reset the lamp counter. See "Resetting the Lamp Counter" on page 59. .Note: •The Lamp replacement icons (Fig.1 and Fig.2) will not appear when the Display function is set to “Off” (p.46), during “Freeze” (p.27), or “No show” (p.27). Fan Fig.1 Lamp replacement icon This icon appears on the screen when the end of lamp life is approaching. .Note: •This icon also appears at turning on and selecting input source. Fig.2 Lamp replacement icon This icon appears on the screen when the end of lamp life is reached. .Note: •At turning on, the icon (Fig.2) will appear. At selecting input source, the icon (Fig.1) will appear. Setting Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to “Resetting the Filter Counter” on page 57. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Quit Exit the Setting Menu. Filter counter Use the Point 7 8 buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment. Fig.3 Filter warning icon Filter warning icon appears on the screen at a set time. .Note: •This icon also appears at turning on.. Fig.4 Filter warning icon .Notes: •At selecting input source, the icon (Fig.4) will appear.. •The Filter warning icons (Fig.3 and Fig.4) will not appear when the Display function is set to “Off” (p.46), during “Freeze”(p.27), or "No show" (p.27). Factory default Select Factory default and this box appears. Select [Yes], and the next box appears. Select [Yes] to activate it. Maintenance and Cleaning Warning Indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON-OFF button. .Note: •The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking. Then check the matters below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked. – Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. – Is the filter clean? Clean the filter periodically. Top Control ON-OFF POWER AUTO SETUP INPUT W ARNING LAMP REPLACE MENU - VOLUME + VOLUME SELECT WARNING blinking red The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on ...
Dieses Handbuch ist für folgende Modelle:Fernseher - LC-XB29N (2.11 mb)