Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Also, the lower rating will turn [VIEW] automatically. • When you turn “G” to [VIEW], the all ratings will turn to [VIEW] automatically. 4 Exit the V-Chip setting mode Press the MENU button on the remote control to return to original mode. - 16-EN 9I03 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. Window CORRECT WRONG PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. PLAY B 2 To begin playback Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button. STOP 3 To stop playback Press the STOP button when playback is completed. AUTO REPEAT PLAYBACK The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds. 1 Select “USER’S SET UP” – M E N U – Press the MENU button on the TIMER PROGRAMMING PICTURE CONTROL remote control. SETTING CLOCK CHANNEL SET UP B USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] Press the PLAY/K or STOP/L but- CAPTION [OFF] ZERO RETURN TIME SEARCH ton to point to “USER’S SET UP”. Then, press the F.FWD/B button. 2 Select “ALL” or “BLANK” Press the PLAY/K or STOP/L button to point to “REPEAT PLAY”. – USER’S SET UP – Press the F.FWD/B or REW/s RENTAL [OFF] B REPEAT PLAY [ALL] button repeatedly until your desired AUTO RETURN selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start the Repeat Play. “REPEAT PLAY B” appears. • Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. • If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. - 17-EN 9I03 SEARCH SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes) 2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press the COUNTER RESET button repeatedly. 3 Begin recording or playback Press the RECORD or PLAY button. Press the STOP button when recording or playback is completed. 4 To activate “ZERO RETURN” mode Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “ZERO RETURN”. – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Then, press the F.FWD/B button. CHANNEL SET UP USER’S SET UP V-CHIP SET UP screen. LANGUAGE [ENGLISH] CAPTION [OFF] B ZERO RETURN The counter will appear on the TV The tape will automatically stop TIME SEARCH when the counter returns to 0:00:00. TIME SEARCH The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: • Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time....