Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Poor Reception on Some Channels Ghosts in Picture • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. Weak Picture • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Adjust CONTRAST & BRIGHT control. Sound OK, Picture Poor • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. • Adjust CONTRAST & BRIGHT control. –47– EN 01A11 PROBLEM CORRECTIVE ACTION Picture OK, Sound Poor Timer recording is not possible. • Try a new channel, if OK, then possible station trouble. • Check for local interference. • Make sure the timer recording is set correctly. • Make sure the power is off. • Make sure the TV/DVD/VCR clock is set correctly. Cannot go into Record mode. • Make sure the tape has an erase-prevention tab. If need, cover the hole with plastic tape. Playback picture is partially noisy. • Adjust tracking control for a better picture using the CHANNEL button K or L on the TV/DVD/VCR. No picture but the audio is OK in playback. • Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” on page 50. No operation by infrared Remote Control. • Make sure the AC cord is connected to an AC outlet. • Check batteries in remote control. Video or color fades in and out when making a copy of a video tape. • You can not copy a copyrighted video tape. You are experiencing copy guard protection. Different color marks on screen. • Magnetism from nearby appliances and geomagnetism might affect the color of the TV picture. Move the TV/DVD/VCR away from the appliances, the TV/DVD/VCR can repair itself automatically. If you want to repair immediately, turn off using the POWER button, then turn it on again 30 minutes or so later (27” model), or unplug the power cord, then plug it in again 30 minutes or so later (19” model). CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/DVD/VCR is showing captions that are misspelled. • You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions. My TV/DVD/VCR will not show the text dialogue in its entirety or there is a delay of what is being said. • Captions that are delayed a few seconds behind the actual are common for live broadcast. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. My captions are scrambled with white boxes on the TV screen. • Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear. My program guide listed a TV show as being closed captioned but none of the captions were displayed. • Broadcasters may at times use a time compression process to speed up the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost. My prerecorded video tape does not show any captions. The tape box mentions it being closed captioned. • The video tape was either an illegal copy or the tape duplicating company accidentally left out the captioning signals during the copying process. My TV screen shows a black box on certain channels. • You are in the TEXT mode. Select CAPTION mode to CAPTION [OFF]. –48– EN 01A11 DVD Mode PROBLEM CORRECTIVE ACTION No picture. • Connect the video cables firmly. • Insert a correct video disc that plays on this TV/DVD/VCR. • Press the SELECT button on the remote control to select DVD mode. Then, try other DVD feature. Disc cannot be played. • Insert the disc. • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental lock or change the control level. No sound. • Connect the audio cables firmly. • Turn the power of the audio component on. • Correct the audio output settings. • Correct the input settings on the audio component. No DTS audio is output. • This TV/DVD/VCR does not support DTS audio. This is not a malfunction. Distorted picture. • There are some cases where pictures may be slightly distorted, which are not a sign of a malfunction. • Although pictures may stop for a moment, this is not a malfunction. Audio or subtitle language does not match the set up • The selected language is not available for audio or subtitles on the DVD. This is not a malfunction The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera angles. This is not a ma...