Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Hyundai H-LCD4201 |
Anleitung Zusammenfassung
In TV, AV, SVIDEO mode. 2. RECALL button. The former channel can be restored if the last operation is changing channel; this button also can be also used go back to the last signal source if the last operation is changing the signal source. 3. Number buttons. 4. AV button. Switch among the signal sources. 5. P.MODE button. Select among picture modes. 6. MENU button. By pressing this button continuously, the menu can be displayed or hidden; switching among each menu can be realized. 7. V-/V+ buttons. Increase/decrease the volume; in menu operation mode, the buttons are used for function selection and operation; in mute mode, press button V+ to quit mute mode. 8. OK button. Confirmation of selection or operations. 9. Color buttons. Fast Teletext control. 10. DISPLAY button. Check the current mode, which TV is working in. 11. STILL button. Freeze or activate the current picture. 12. TEXT button. Enter or quit the Picture/Text mode. 13. MIX button. Lapping over the Picture/Text and picture. 14. HOLD button. Holding the content of the Picture/Text. 15. SIZE button. ZOOM mode for the Picture/Text. 16. E/W button. Switching character set. 17. FAVS/CH+ button. Scanning your favorite program or 16 increasing the PIP channel number. 18. Enter or exit the PIP function. Only valid when main ^ source is TV or AV. " 19. CH- button. Decrease the PIP channel number. 20. POWER button. Enter or quit the standby mode. 21. HDM button. Shortcut key for entering into HDMI. 22. S.MODE button. Select among four sound modes: Theater, News, User and Music. 23. EXIT button. Key for quit the current operation interface. 24. P+/P- buttons. In TV mode, the buttons are used to increase/decrease the channel number for non-menu operation; for menu operation, the buttons are used to select the functions; in non-menu operation mode, the buttons can be used to restore to TV mode when the TV is in other mode. 25. SLEEP button. Set the time to standby mode. 26. MUTE button. Enter or quit mute mode. 27. The button can be used to switch among NICAM/IGR STEREO/MONO; Requests Index page when index link is valid. 28. Sub-code, sub-page of the Picture/Text. 29. Reveal, displaying the hidden information in the Picture/Text. 30. Cancel, displays TV picture while maintaining TXT mode active. 31. PROG button. Clear settings of the “Program Preset” menu. 32. SCAN button. Scanning with 9 pictures. 33. Change the position of the PIP window. 34. Change the size of the PIP window. 8 Insert the batteries • Remove the battery cover by pressing the symbol and pulling the cover space in the direction of the arrow. • Insert the two 1.5 V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. • Replace the battery cover by sliding it in until you hear a click sound. Note: If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new batteries. Use of RC Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may prevent proper operation. Note: The illustration is for your reference only; the remote sensor may locate differently with different model. Cautions regarding use of RC • Do not expose the RC to liquids, and do not place in an area with high humidity. • Do not install or place the RC under direct sunlight. The heat may cause deformation of the unit. • The RC may not work properly if the remote sensor of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the RC closer to the remote sensor. 9 OSD operations Note: In this manual the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. In the following contents, press MENU button to enter the menu; press P+/P- buttons or CH+/CH- buttons to select an item. The highlight background means the current selection, press V+/V- buttons to set the selected item or enter into sub-menu, after setting is done, press OK button or MENU button to go back to the previous menu. Press MENU button or EXIT button to quit the setting menu. Picture Press MENU button and select the PICTURE setting menu described as the following picture • Contrast. To adjust picture contrast. • Brightness. To adjust picture brightness. • Saturation. To adjust picture saturation. • Sharpness. To adjust picture sharpness. • Tint (in the NTSC mode). To adjust picture tint. • Color Temp. Following modes of color temperature are provided: Normal, Warm and Cool. • DNR. Provide the picture with dynamic noise reduction treatment, checking the high frequency noise of the picture, there are Off, Low, Middle and High, four modes of noise reduction. “Off’ means to close the noise reduction function. Sound Press MENU button, and select the SOUND setting menu described as the following picture: • Volume. To adjust the vol...