Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
CABLE BOX CONNECTIONS
5
Cable Box (w/RF In/Outputs):
If your cable signal uses a cable box
or decoder, follow the easy steps
below to complete the connection.
Cable Box (w/RF In/Outputs):
This connection will be mono.
Cable Signal IN from the
1Connect the Cable Company
Cable Company
supplied cable to the signal
IN(put) plug on the back of the
Cable Box.
VIDEO
AUDIO IN
SPDIF
IN OUT
2Using a separate round coaxial
CABLE
R L
S-VIDEO
TO
IR
DVD-D OUT
IN
TV/VCR
cable, connect one end to the
AUDIO OUT
Y Pb Pr
USB
TV
OPTICAL
PASSCARD
SPDIF
OUT(put) (TO TV) plug on the
Jack Panel Back of Cable Box
back of the Cable Box.
3Connect the otherend of the
round coaxial cable to the 75
ohm input on the back of the
television. Screw it down finger
tight.
Round 75 ohm
NOTE: If applicable, set the OUT-
Coaxial Cable
PUT CHANNEL SWITCH on the
Jack Panel Back of TV
back of the cable box to CH 3 or 4.
Tune the TV to the same channel and
change channels at the cable box. In
some cases, the cable box will auto-
Cable Box (w/Audio/Video Outputs):
matically tune to either channel 3 or 4,
change channels until the picture
Cable Box with
appears.
A/V Outputs
Cable Box (w/Audio/Video
Cable Signal IN
"
Outputs):
from the Cable
This connection will supply Stereo
Company
sound.
4Connect the Cable Company
supplied cable to the cable sig-
VIDEO
AUDIO IN
SPDIF
IN OUT
nal IN(put) plug on the back of
CABLE
R L
S-VIDEO
TO
IR
DVD-D OUT
IN
TV/VCR
the Cable Box.
AUDIO OUT
Y Pb Pr
USB
TV
OPTICAL
PASSCARD
SPDIF
5Using a RCAtype Video Cable,
connect one end of the cable to
Audio Cables
the Video (or ANT, your cable
L (White) & R (Red)
box may be labeled differently)
Video Cable
Out jack on the cable box and
(Yellow)
the other end to the AV1 Video
Input on the TV.
6Connect one end of the Audio
Left and Right Cable to the left
and right Audio Out L & R
jacks on the cable box. Connect
Jack Panel
the other end to the AV1 Audio L
Back of TV
& R Input jacks on the TV.
NOTE: Press the CH+ or CH- on the
TV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable
box, not the television.
...Dieses Handbuch ist für folgende Modelle:
Fernseher - 27PT8420/37 (1.12 mb)