Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hobart Welding Products Dateigröße: 577.63 kb Dateiname: Champion_10K.pdf Unterrichtssprache:

It also performs general scratch start DC TIG. The Champion 10,000 offers a “no-nonsense” warranty. The engine is warranted separately by the engine manufacturer. Comes complete with 15 ft Work Cable and Clamp, and 20 ft Welding Lead and Electrode Holder! FEATURES BENEFITS You get a generator andwelder for about what you would pay for just a generator! Smooth arc starts with minimal “sticking”. Extraordinary motor starting characteristics. Strong continuous rating to run compressors, pumps, lights, hand tools and other equipment. Provides stamina and long dependable service. Enclosed design, large battery, rugged electrical connections and wiring, and circuit-breaker protection. Just over 3 ft long and weighs 10 – 20% less than competitive units. Modern engines from Robin or Kohler, with 10-gallon fuel tank and low oil pressure shutdown as standard features. Dependable engines conserve fuel and provide long operation before refueling. Help maintain scheduled routine oil servicing (every 100 hours) and other preventative maintenance. Easy to set up and start welding. Primarily designed for the Stick process, the Champion 10,000 also provides a smooth arc for scratch start DC TIG welding. All-in-one 10,000-watt generator and 230-amp welder Innovative Hobart technology Heavy-duty construction Lightweight and compact design Choice of OHV engines A “no tools” oil change and standard hour meter Quick-set current control Smooth DC weld output Rated Output SPECIFICATIONS (SUBJECT Max. Open-Circuit Voltage TO CHANGE WITHOUT NOTICE.) Amperage Range Auxiliary Power Dimensions INDUSNet Weight TRIAL 230 amps at 25 V, 30% duty cycle 210 amps at 25 V, 60% duty cycle 73 VDC 50–230 amps 10,000 watts peak; 120/240 VAC, 60Hz, 9,500 watts continuous while not welding H: 33 in (838 mm) W: 18-3/4 in (476 mm) D: 37-1/2 in (953 mm) Kohler:440 lb (200 kg) Robin: 445 lb (202 kg) Rated output decreases approximately 3.5% per 1000 ft (305 m) above sea level. The rated output of any engine-driven welder/generator decreases as temperatures rise. The ratings for the Champion 10,000 were taken at high temperatures, only after the machine reached operating temperature. Even in hot weather the Champion 10,000 has the vigor to let you finish the job. Engine Brand ENGINE SPECHorsepower (HP) (SUBJECIFICATIONS Type T TO CHANGE WITHOUT NOTICE.) Weld Speed Idle Speed Fuel Capacity Oil Capacity/Change Kohler #500 434 23 HP at 3600 RPM (3-year mfg. warranty) Twin-cylinder, 4-cycle, overhead-valve, industrial, air-cooled, gasoline engine 3750 RPM 2200 RPM 10 gallons 1.75 qt (1.7 L) every 100 hours; 2 qt (1.9 L) w/filter every 200 hours Subaru/Robin #500 433 22 HP at 3600 RPM (3-year mfg. warranty) Twin-cylinder, 4-cycle, overhead-valve, industrial, air-cooled, gasoline engine 3750 RPM 2200 RPM 10 gallons 1.6 qt (1.55 L) every 100 hours; 1.8 qt (1.75 L) w/filter every 200 hours Hobart Welders An Illinois Tool Works Company Web Site HobartWelders.com U.S. Distributor Sales Phone 920-735-4576 FAX 800-637-2315 Hobart Retail Sales Phone 800-332-3281 FAX 937-332-4161 Canadian Sales Phone 888-489-9353 FAX 519-421-0480 International Sales Phone 920-735-4509 FAX 920-735-4125 CONTROL PANEL 1. Engine Control Switch allows for engine speed selection. In Run/Idle position, engine runs at idle speed at no load, and weld/power speed under load. 2. Engine Choke Control. Use control to change engine air/fuel mix. 3. Engine Hour Meter. Combined with the Fastex “no tools” oil change feature, routine service is easily monitored and performed. 4. Amperage Control. Easy to set up for welding, and the amperage control does not have to be turned up to maximum to gain full auxiliary output. 5. Amperage Selection Chart. Explains weld settings for typical electrode diameter sizes and types. 6. 120/240 Volt Receptacle. This versatile, 50-amp circuit-breaker-protected receptacle can supply up to 10,000 watts of 230-volt power or, up to 10,000 watts of 120-volt power through two separate 120-volt circuits. (Note: Protective covers not shown.) 7. 120 Volt Receptacle. Protected by two 20-amp circuit breakers.Champion 10,000 10,000-WATT AUXILIARY POWER GENERATOR • 230-AMP DC/CC WELDER AMPERAGE ADJUST ENGINE AC POWER: TOT MADE IN GND/PE 120 V / 240 V START RUN RUN / IDLE OFF CHOKE3/32 1/8 5/32 3/16 5/64 3/32 1/8 5/32 3/16 3/32 1/8 5/32 3/32 1/8 5/32 3/32 1/8 5/32 3/32 1/8 5/32 3/32 1/8 5/32 ELECTRODEDIAMETER50100150200 AMPERAGE RANGE 6010 & 6011 6013 7014 7018 7024 Ni-Cl 308L MAXMIN 80 100 120 140 160 180 200 220 CONTROL PANEL 1. Engine Control Switch allows for engine speed selection. In Run/Idle position, engine runs at idle speed at no load, and weld/power speed under load. 2. Engine Choke Control. Use control to change engine air/fuel mix. 3. Engine Hour Meter. Combined with the Fastex “no tools” oil change feature, routine service is easily monitored and performed. 4. Amperage Control. Easy to set up for welding, and the amperage control does not have to be turned up to maximum...

Herunterladen

Geben Sie zwei Ziffern: