Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Hobart Welding Products Dateigröße: 436.04 kb Dateiname: de46cf6a-db1d-4414-91de-715d44efcb3c.pdf Unterrichtssprache:

READ BEFORE USING . . . . . . . . . . . . . . . . . . . . SECTION 2 . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . SECTION 3 . OPERATING INSTRUCTIONS . . . . . . . . . . . . . . SECTION 4 . BATTERY REPLACEMENT . . . . . . . . . . . . . . . . SECTION 5 . MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 6 . TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . SECTION 7 . LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . SECTION 8 . REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . 1 2 5 8 8 9 10 11 SECTION 1 . SAFETY PRECAUTIONS . READ BEFORE USING Warning! Watch Out! There are possible hazards as shown in the adjoining symbols. Read and follow Section 1 for all safety symbols. ARC RAYS can burn eyes and skin. Arc rays from the welding process produce intense visible and invisible (ultraviolet and infrared) rays that can burn eyes and skin. Sparks fly off from the weld. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Standards). Refer to Shade and Sensitivity charts in Section 2. Wear approved safety glasses with side shields under your helmet. Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc. Wear protective clothing made from durable, flame-resistant material (leather and wool) and foot protection. WELDING HELMETS do not provide unlimited eye, ear and face protection. Use impact resistant safety spectacles or goggles and ear protection at all times when using this welding helmet. Do not use this helmet while performing grinding operations, working with or around explosives or corrosive liquids. Do not weld in the overhead position while using this helmet. Inspect the auto-lens frequently. Immediately replace any scratched, cracked, or pitted cover lenses or auto-lenses. NOISE can damage hearing. Noise from some processes or equipment can damage hearing. Wear approved ear protection if noise level is high. Page 1 SECTION 2 . SPECIFICATIONS XTF Technical Specifications (Fixed Shade #10) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (110 x 90 x 10 mm) Viewing Field 3.75 x 1.37 in (95 x 35 mm) Reaction Time Light to dark: 0.00028 second (1/3,600) Dark to light: 0.12 second Available Shades Darkened State: #10 / Light State: #3 Sensors Independent (Two) Operating Temperature 23F to 131F (.5C to +55C) Storage Temperature .4F to 176F (.20C to +80C) Power Supply Battery-powered, solar rechargeable (internal, non-replaceable lithium battery) Total Weight 1 lb (454g) Standards ANSI Z87.1-2003/CSA Warranty 2 years from date of purchase (see Section 7) NOTE: Expose the solar cell to bright sunlight for 30 minutes before use. Lens Page 2 XTV Technical Specifications (#9 . #12 Variable Shade) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (110 x 90 x 10 mm) Viewing Field 3.75 x 1.57 in (95 x 40 mm) Reaction Time 0.000083 second (1/12,000) Available Shades ANSI: Darkened State: #9 . 12 / Light State: #4 CE/CSA: Darkened State: #9 . 13 / Light State: #4 Sensors Independent/redundant (Two) Operating Temperature 23F to 131F (.5C to +55C) Storage Temperature .14F to 158F (.10C to +70C) Power Supply 2 AAA Alkaline batteries (included) Total Weight 1 lb (454g) Standards ANSI Z87.1-2003 CE/CSA Warranty 2 years from date of purchase (see Section 7) Sensitivity Control light levels Adjusts for varying ambient light and welding arc Delay Control Slows lens dark-to-light state between 0.1 and 0.5 seconds (fast/slow switch) Automatic Power Off Shuts lens off 15.20 minutes after last arc is struck Low Battery Indicator Red LED light illuminates to indicate low battery Battery Compartment (2 AAA Alkaline Batteries Included) Shade Control Sensitivity Control Delay Control Lens Low Battery Indicator On/Off Button Page 3 XTP Technical Specifications (Professional #9 . #13 Variable Shade) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (110 x 90 x 10 mm) Viewing Field 3.81 x 1.85 in (97 x 47 mm) Reaction Time 0.0000625 second (1/16,000) Available Shades Darkened State: #9 . 13 / Light State: #4 Sensors Independent/redundant (Two) Operating Temperature 140F to 1310F (60C to +710C) Storage Temperature .40F to 1580F (.40C to +860C) Power Supply CR2450 Lithium battery (Hobart 770284) Total Weight 1 lb (454g) Standards ANSI Z87.1-2003/DIN/CE/TUV/CSA Warranty 2 years from date of purchase (see Section 7) Sensitivity Control light levels Adjusts for varying ambient light and welding arc Delay Control Slows lens dark-to-light state between 0.1 and 1.0 seconds (infinite dial control) Automatic Power Off Shuts lens Off 15.20 minutes after last arc is struck Low Battery Indicator Red LED light illuminates to indicate low battery Battery Compartment (Lithium Battery Included) Shade Control Sensitivity Control Delay Control Lens Low Battery Indicator On/Off Button Page 4 SECTION 3 . OPERATING INSTRUCTIONS On/Auto-Off Button Locate the ON b...

Herunterladen

Geben Sie zwei Ziffern: