Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Lincoln Electric, modell METALUX 396T8HO

Hersteller: Lincoln Electric
Dateigröße: 58.88 kb
Dateiname: e6610fc8-4e65-4e30-8b58-ac4944b81196.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Ingredients: CAS No. Wt.% TLV mg/m3 PEL mg/m3 Limestone and/or calcium carbonate 1317-65-3 10 10 15 Fluorides (as F) 7789-75-5 5 2.5 2.5 Silicates and other binders 1344-09-8 < 5 10* 10* Quartz 14808-60-7 < 5 #0.05** #0.1** Chromium and chromium alloys or compounds (as Cr)***** 7440-47-3 1 0.5(b) 1.0(b) Titanium dioxides (as Ti)***** 13463-67-7 1 10 15 Iron 7439-89-6 0.5 10* 10* Mineral silicates 1332-58-7 0.5 5** 5** Manganese and/or manganese alloys and compounds (as Mn)***** 7439-96-5 0.5 0.2 1.0(c) Iron oxides (as Fe) 65996-74-9 < 0.5 5 10 Niobium alloys (as Nb) 7440-03-1 < 0.5 10* 10* Aluminum oxide and/or Bauxite***** 1344-28-1 < 0.5 10 10 Molybdenum alloys (as Mo) 7439-98-7 < 0.5 10 10 Aluminum and/or aluminum alloys (as Al)***** 7429-90-5 < 0.5 10 15 Titanium and/or titanium alloys (as Ti) 12719-90-3 < 0.5 10* 10* Silicon and/or silicon alloys and compounds (as Si) 7440-21-3 < 0.5 10* 10* Nickel alloy core wire 70 Nominal core wire composition Chromium***** 7440-47-3 21.5 0.5(b) 1.0(b) Molybdenum 7439-98-7 9 10 10 Niobium 7440-03-1 3.5 10 10 Nickel***** 7440-02-0 Bal. 1.5 1 Supplemental Information: (*) Not listed. Nuisance value maximum is 10 milligrams per cubic meter. PEL value for iron oxide is 10 milligrams per cubic meter. TLV value for iron oxide is 5 milligrams per cubic meter. (**) As respirable dust. (*****) Subject to the reporting requirements of Sections 311, 312, and 313 of the Emergency Planning and Community Right-to-Know Act of 1986 and of 40CFR 370 and 372. (#) Crystalline silica (quartz) is on the IARC (International Agency for Research on Cancer) and NTP (National Toxicology Program) lists as posing a carcinogenic risk to humans. (b) The OSHA PEL for chromium (VI) is 5 micrograms (0.005 milligrams) per cubic meter. The TLV for water soluble chromium (VI) is 0.05 milligrams per cubic meter and the TLV for insoluble chromium (VI) is 0.01 milligrams per cubic meter. (c) Values are for manganese fume. STEL (Short Term Exposure Limit) is 3.0 milligrams per cubic meter. Values are those proposed by OSHA in 1989. Present PEL is 5.0 milligrams per cubic meter (ceiling value). SECTION III - HAZARD DATA Non Flammable; Welding arc and sparks can ignite combustibles and flammable products. See Z49.1 referenced in Section VI. Product is inert, no special handling or spill procedures required. Not regulated by DOT. Rev 11/06b (CONTINUED ON SIDE TWO) Product: Blue Max NiCro 60/20 Date: 11/5/06 SECTION IV - HEALTH HAZARD DATA Threshold Limit Value: The ACGIH recommended general limit for Welding Fume NOS - (Not Otherwise Specified) is 5 mg/m3. ACGIH-1999 preface states that the TLV-TWA should be used as guides in the control of health hazards and should not be used as fine lines between safe and dangerous concentrations. See Section V for specific fume constituents which may modify this TLV. Threshold Limit Values are figures published by the American Conference of Government Industrial Hygienists. Units are milligrams per cubic meter of air. Effects of Overexposure: Electric arc welding may create one or more of the following health hazards: Fumes and Gases can be dangerous to your health. Common entry is by inhalation. Other possible routes are skin contact and ingestion. Short-term (acute) overexposure to welding fumes may result in discomfort such as metal fume fever, dizziness, nausea, or dryness or irritation of nose, throat, or eyes. May aggravate pre-existing respiratory problems (e.g. asthma, emphysema). Chromates present in the fume have been known to cause severe irritation of the bronchial tubes and lungs. Asthma has been reported. Exposure to extremely high levels of fluorides can cause abdominal pain, diarrhea, muscular weakness, and convulsions. In extreme cases it can cause loss of consciousness and death. Long-term (chronic) overexposure to welding fumes can lead to siderosis (iron deposits in lung) and may affect pulmonary function. Manganese overexposure can affect the central nervous system, resulting in impaired speech and movement. Bronchitis and some lung fibrosis have been reported. Repeated exposure to fluorides may cause excessive calcification of the bone and calcification of ligaments of the ribs, pelvis and spinal column. May cause skin rash. Chromates may cause ulceration and perforation of the nasal septum. Liver damage and allergic reactions, including skin rash, have been reported. Chromates contain the hexavalent form of chromium. Hexavalent chromium and its compounds are on the IARC (International Agency for Research on Cancer) and NTP (National Toxicology Program) lists as posing a cancer risk to humans. Nickel and its compounds are on the IARC (International Agency for Research on Cancer) and NTP (National Toxicology Program) lists as posing a cancer risk to humans. Nickel compounds are skin sensitizers with symptoms usually occurring after repeated exposure - ranging from a slight itch to severe dermatitis. WARNING: This product contains or produces a chemic...