Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Also, some diseases that may be linked to exposure to welding or plasma cutting exhaust fumes are: • Early onset of Parkinson’s Disease • Heart disease • Ulcers • Damage to the reproductive organs • Inflammation of the small intestine or stomach • Kidney damage • Respiratory diseases such as emphysema, bronchitis, or pneumonia Use natural or forced air ventilation and wear a respirator approved by NIOSH to protect against the fumes produced to reduce the risk of developing the above illnesses. Maintain the helmet and lens correctly 15. to help ensure reliable protection. Clean filter’s surfaces regularly.• Keep sensors and solar cells clean using a clean lint-free tissue/cloth. Do not use any solvents on filter’s screen or helmet components. Protect filter from liquid and dirt contact. Do not immerse the filter in water. Should the Auto-Darkening Welding • Helmet not darken upon striking an arc, stop welding immediately and have the helmet checked by an authorized service technician. Regularly replace the Front Lens • Cover if it becomes cracked, scratched, pitted, or otherwise damaged. Do not make any modifications to • either the Auto-Darkening Filter or the rest of the helmet, other than those specified in this manual. Do not use any replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the user to the risk of personal injury. Do not open or tamper with the Auto-Darkening Filter. Do not place the Welding Helmet’s 16. Auto-Darkening Filter on a hot surface. Severe personal injury17. and/ or blindness may occur if the user fails to follow the aforementioned warnings and/or fails to follow the operation instructions. Specifications Description Auto-Darkening Welding Helmet Power Source Solar powered cells with battery assistance (not rechargeable) Operating Temp. 23° to 131° F Resting Shade Shade # 4 Shade Range 9 to 13 UV/IR Protection up to DIN 16 at all times Lens Type ANSI Z87.1-2003 approved Viewing Area 3.86” x 1.73” Welding Protection Types For Processes including MIG/Flux welding, stick welding, TIG welding (10+ amps), plasma arc welding/cutting and air carbon cutting. Not for Laser Welding or Oxyacetylene Welding/Cutting Lens Switching Speed (Clear to Dark) 1/25,000 second Sensitivity Adjustment High / Low Grinding Mode Transforms helmet to grinding shield without shade flickering Power ON / OFF Fully Automatic Shell Material High Impact-Resistant Plastic Polyamide Nylon Storing Temperature -4° to 158° F Features Ratcheting headband with replaceable padded sweatband, spare External cover lens, 2 independent arc sensors which reduce the risk of blocked sensors during out-of- position welding, variable Shade Control Knob adjusts from #9 to #13 with a #4 resting shade, Delay Control Switch, Sensitivity Control Switch Weight 1.3 lb. Unpacking: When unpacking, make sure all the parts are included. Refer to the Parts List and Assembly Diagram at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Shade Guide Chart Welding Process Arc Current (Amperes) 10 20 40 80 125 175 250 300 450 5 15 30 60 100 150 225 275 350 500 Stick/Arc 9 10 11 12 13 Mild Steel MIG (argon shielded) 10 11 12 13 Mild Steel MIG, (CO2 shielded) 10 11 12 13 Aluminum MIG 10 11 12 13 TIG 10 11 12 13 Flux Core 10 11 12 13 Plasma Cutting 11 12 13 Plasma Welding 9 10 11 12 13 Function The Auto-Darkening Welding Helmet is designed to protect the eyes and face from sparks, splatter, and harmful radiation under normal welding conditions. The Auto- Darkening Filter automatically changes from a clear state to a dark state when an arc is struck, and it returns to the clear state when welding stops. Before Welding The Auto-Darkening Welding Helmet comes ready for use. The only things you need to do before welding are to remove the protective film from both sides of the lens (if not already done), adjust the position of the headband, select the correct shade number for your application, and test the helmet for proper operation as described following. Check the Front Cover Lens to makes sure that it is clean, and that no dirt is covering the two sensors on the front of the Filter Cartridge. Also check the Front/Inside Cover Lens and the Front Lens Retaining Frame, and make sure that they are secured in place. Inspect all operating parts before each use for signs of wear or damage. Any scratched, cracked, or pitted parts should be replaced immediately before using again to avoid severe personal injury. Shade Number & Grinding Mode Selection Shade Number Shade Control KnobTension Adjustment KnobFigure 1Select the shade number you need (see Shade Guide Chart on the previous page) by turning the Shade Control Knob. Be sure that the shade number of the Welding Helmet is the correct shade number for your application. Note: If a selection of shades are recommended for your application, try...