Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Haier Dateigröße: 2.65 mb Dateiname: 38e439c2-46fc-4c01-91e5-1a73e962388f.pdf Unterrichtssprache:

Any damaged dryer must not be used. if the unit is damaged, contact your dryer supplier; ¦ The dryer must be kept away from flammable substances; ¦ The surrounding environment must be dry and ventilated; ¦ To allow the dryer to perform better, the ambient temperature shall not be lower than 10. nor higher than 35.. Change the door-opening direction If the direction of the dryer's door is not suitable to the location, its opening direction may be changed. The procedure is as follows: 1. Unscrew the 4 hinge screws holding the door onto the machine and remove the door. 2. Unscrew the door catch 6 and prise out the catch cover on the opposite side of the door and transpose them. 3. Unscrew the door hinges and prise out the hinge covers on the opposite side of the door and transpose them. 4. Remove the 4 blanking plugs from the screw holes on the machine and insert them in the holes on the other side. 5. Refit the door on the opposite side of the machine. a-door hinge b-catch cover c-door d-hinge cover e-door catch f-blanking plug Name Owner's manual Certificate of Conformity Drainpipe Installtion Installtion b c c d e b a e f Preparation Installtion 6 be removed from the box after every drying cycle. If your dryer is in the vicinity of a drain, you may allow the condensed water to discharge directly into the drain through the drainpipe provided to avoid emptying the box every time. The method to connect the drainpipe is as follows: 1. Loosen the hose clip with the drain switchover joint; 2. Pull the hose off the joint; 3. Install the accessory drainpipe on the joint; 4. Fix the hose in place with the clip; Note: The outlet of the drainpipe must not be higher than 1.0 m above the floor 7 Turning on power Before turning on the power for the dryer, check: ¦Whether the supply voltage is in accordance with the value indicated on the nameplate; Whether the supply receptacle can withstand the maximum power load to the dryer; Whether the supply receptacle is in accordance with the plug of the dryer. If not, replace the power supply cable or receptacle to make them accord with each other; The replacement of the power supply cable must be made by a qualified professional or our authorized service agent; ¦The dryer must be grounded securely. ¦ ¦ ¦ ¦ Attention ¦ Before use, clean any deposits from inside the drum of the dryer with a wet towel; ¦ Clean debris on the filter screen to increase the drying efficiency. Warning: Do not dry wool, silk, down and other delicate fabrics to avoid damage to fabrics. Load to dry Make sure that the laundry you are going to dry is suitable for drying in a dryer.You will find information on this on the laundry labels.The following symbols mean: Treatment of laundry to dry ¦Check whether the laundry to be dried is suitable to be dried in the dryer; ¦The dryer can only dry the laundry that has been spun dry. Do not put too wet laundry into the machine; ¦Empty all pockets of the laundry with such items as keys and coins and remove ...

Herunterladen

Geben Sie zwei Ziffern: