Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: GE Dateigröße: 1.71 mb Dateiname: 7702a31b-bdcc-47c9-96c7-cd7b3098da52.pdf Unterrichtssprache:

at the neck, cuffs and seams). 10 10 Programme overview Programmesmax. load(weight when dry) Additional func tions Application/properties Care mark DELICATELONG ANTI-CREASEBUZZERTIMEDELAY START SPORTS LIGHT 2 kg • 2) • • -• For sportswear, thin fabrics, polyester, which are not ironed. EASY IRON PLUS 1 kg (or 5 shirt s) • 2) • • -• Special program with anti-crease mechanism for easy care fabrics such shirts and blouses; for min- imum ironing effort. The results depends on the type of fabric and its finish. Place fabrics in the dryer straight after spinning; once dried, immedi- ately remove fabrics and place on a clothes hang- er. WOOL CARE 1 kg • -• -• Special programme for briefly treating woollens with warm air, after they have been dried natu- rally, worn or stored for long periods. Wool fibres stand up and the wool becomes soft and cosy. Recommendation: Remove fabrics immediately after drying. 1) select DELICATE 2) set by default Daily use 11 Daily use Switching machine on / switching light on Turn the programme selector to any programme or turn it to DRUM LIGHT. The machine has been switched on. When the loading door is opened, the drum is illuminated. Opening loading door / loading laundry 1. Open loading door: Use force to push against the loading door (push point) 2. Load your laundry (do not force it in). CAUTION! Do not jam laundry in between the loading door and rubber seal. 3. Close loading door securely. Lock must audibly lock. Selecting the programme Use the programme selector to set the programme you require. The estimated time to end of the programme appears in the LCD in h:mm format (hours:minutes). During the cycle time elapses by steps of one minute; less than 1 hour the leading zeros are not shown (ex. “59”, “5”, “0”). DELICATE function For especially gentle drying of sensitive fabrics with the care label and for temperature- sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat. Delicate function is only suitable for use with loads of up to 3kg. To activate it: 1. Choose the drying programme. 2. Press DELICATE button - the led above is on. To deselect function press again DELICATE button. Led above is off. 12 12 Daily use LONG ANTI-CREASE function A long anti-crease phase lengthen the anti-crease phase (30 min.) at the end of the drying additionally by 60 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. Phase lasts in total 90 minutes. The laundry can be removed at any time during the anti-crease phase. To activate it: 1. Choose the drying programme. 2. Press LONG ANTI-CREASE button - the led above is on. To deselect function press again LONG ANTICREASE button. Led above is off. BUZZER function The appliance is supplied with the BUZZER function deactivated. The buzzer sounds or plays a tune when activated during: – cycle end – anti-crease phase and when phase starts or ends – cycle interruption by a warning –alarm To activate it: 1. Choose the drying programme. 2. Press BUZZER button - the led above is on. To deselect function press again BUZZER button. Led above is off. TIME function To select the programme duration after setting the TIME programme. You can select a programme duration from 10 mins to 3 hrs in 10-minute steps. 1. Turn the programme knob to the TIME programme. The blinking 10' appears in the display. (corresponding to the COOLING programme). Daily use 13 2. Press the TIME button repeatedly until the desired programme duration is shown in the display, e.g. 20 for a programme of 20 minutes. If the programme duration is not selected, the duration is automatically set to 10 mins. DELAY START function With the DELAY START button, you can delay the start of a programme by between 30 minutes (30') and a maximum of 20 hours (20h). 1. Select the programme and additional functions if necessary. 2. Press the DELAY START button as many times as necessary until the required start delay appears on the display, e.g. 12h if the programme is to be started in 12 hours. If the display is showing 20h and you press the button again, the time delay will be cancelled. The display will show 0' and then the duration of the selected programme. 3. To activate the delay timer, press the START PAUSE button. The amount of time remaining until the programme is set to start is continuously displayed (e.g. 15h, 14h, 13h, … 30' etc). The delay time icon is on. CHILD LOCK function The child lock can be set to prevent a programme being accidentally started or a programme in operation being accidentally changed. The child lock function locks all buttons and the programme knob. The child lock can be activated or deactivated by holding down the BUZZER and TIME buttons simultaneously for 5 seconds. – Before programme is started: Appliance cannot be used – After programme is started: Programme in operation cannot be changed The icon appears in the display to indicate that the child safety device is activated. The child safe...

Herunterladen

Geben Sie zwei Ziffern: