Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Alliance Laundry Systems Dateigröße: 3.07 mb Dateiname: Unterrichtssprache:

LESS DRY, which uses the least energy, will drylarge loads and lightweight items, such as sheets and shirts, but might leave other items, such as denim and heavy bath towels, more damp. To increase energy savings and to make sureloads are dried without overdrying, set your loads on LESS DRY. If items are damp at the end of a cycle, the timer knob needs to be set closer tothe MORE DRY setting the next time these loads are dried. If items are overdry at the end of a cycle, the timer knob should be set closer to COOL DOWN when these loads are dried again. Remember the settings that work best to get ideal drying results. The COOL DOWN period at the end of each cycle provides items a chance to tumble with no heat and cool down to room temperature. This prevents wrinkles from setting if items cannot becared for immediately. NOTE: The timer knob will not advance as quickly in the AUTOMATIC cycles as it does in the TIME DRY cycle. The time it takes for the timer to advance depends on the type and size of the load being dried. The ENERGY SAVER settings, marked with a dot (•), show which settings will use the least energy and will leave items damp for easier ironing. Automatic Regular/Delicate Cycle Use for sturdy items like play or work clothes and also for delicate items. The type of heat is determined by choosing the proper Fabric Selector option. There are two settings in the AUTOMATIC REGULAR/DELICATE cycle — MOREDRY and LESS DRY. Time Dry Cycle This cycle will operate dryer for up to 75 minutes. Cottons and heavyweight items dry best between 50 and 75 minutes, and lightweight items dry best between 20 and 40 minutes. Automatic Permanent Press/Knits Cycle Use for permanent press items and synthetics. The type of heat is determined by selecting the proper Fabric Selector option. There are twosettings in the AUTOMATIC PERMANENT PRESS/ KNITS cycle — MORE DRY and LESS DRY. -11 802716 -12- 802716 To Dry Clothes IMPORTANT: Refer to the INSTALLATION INSTRUCTIONS before using dryer. IMPORTANT: Before using dryer for the first time, use an all-purpose cleaner or a detergent and water solution and a damp cloth to remove shipping dust from inside of dryer drum. 1. Sort items into separate loads. IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation. 2. Remove lint filter cover, clean lint filter and replace cover. 3. Add clothes loosely into dryer drum. Add fabric softener sheet, if desired. NOTE: To avoid damage to dryer, do not use more than one fabric softener sheet per load. 4. Close loading door. Dryer will not operate with the door open. 5. Select Fabric Selector (available settings vary by model). Follow garment manufacturer’s care labels for recommended temperature settings. 6. Select timer setting in cycle desired. These cycles control the drying time. The ENERGY SAVER settings, marked with a dot (•), show which dryer settings will use the least energy and will leave items damp for easier ironing. 7. Push timer knob in to start dryer. NOTE: To stop dryer at any time, open the door or turn timer knob to an OFF position. To restart dryer, close door, reset timer if necessary, and push in the timer knob. TLW1991N TLW1991 DRY2025 TLW2032N DRY2026N DRY2026N SWD850N Optional Drying Rack A drying rack, Part No. 512082, is available at extra cost through your Factory Authorized Service Center. The drying rack can be used for no-tumble dryingof articles such as tennis shoes, sweaters, stuffed toys or other delicate items. DRY2086N -13 802716 Clothing Care Labels The symbols below appear on many clothing carelabels. Following the instructions on each label will help ensure the best laundry results. WASH BLEACH Machine Wash Cycle Normal Permanent Press/Wrinkle Resistant Gentle/ Delicate Hand wash Warning Signs Hot Warm Cold Do not wring Do not wash Bleach Symbols Any bleach (when needed) Warning Signs On...

Herunterladen

Geben Sie zwei Ziffern: