Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bosch Dateigröße: 285.6 kb Dateiname: Unterrichtssprache:

Press "Start/Pause" button or after half a minute, the program defined by user himself will be stored and will be directly displayed upon next use. Notes: Pressing "Sensor Dry Level" button will be inactive during use of "Custom" function. 3. Press "Sensor Dry Level" button to select a suitable drying time. • After powering on, the clothes dryer automatically sets dryness at "very", which means a longer drying time. If other drying time is desired, press "Sensor Dry Level" button to select a shorter time. 17 Francais 4. Press "Temp" button to set a suitable drying temperature. • After switching on, the dryer sets corresponding temperature adapting to different program selected. If other drying temperature is wanted, press "Temp" button to enable such a selection. 5. Press "Signal" button, a buzzer will sound upon end of a cycle. • After switching on, the dryer automatically sets buzzer at "Softer", while the user may define three prompt sound conditions "Louder", "Softer" and "Off". 6. Press "Wrinkle Saver"button to select a suitable reserved drying program. • After powering on, the dryer delay start drying program automatically sets as disabled. When you desire a drying cycle after a delay time, press "Wrinkle Saver" button to set wrinkle saver drying program. After initial pressing, the LED display indicates 3 hrs, which will be increased until 24 hrs by an increment 1 hr with every pressing. Press again will display drying time. Here if press again, it will repeat from 3 hrs. If keep pressed for 1.5 seconds, LED display will increase continuously. • When "Wrinkle Saver" is enabled, your selected program indicator turns off while "Wrinkle Saver"indicator and remaining reservation time indication turn on. During reserved period, pressing "Wrinkle Saver" button can indicate reserve status. • To change operating program or cancel delay, you should press “OFF” and re-select a new cycle. 7. Press "Touch Up" button to select wrinkle-proof drying mode. • Use the "Touch Up" cycle to continue drying if clothes are still damp after the Automatic cycle. • You can also use the "Touch Up" cycle to remove wrinkles from clean clothes which packed tightly in a suitcase or closet. 8. Press "Start/Pause" button • When starting the machine, first close the door and then press this button. • If pause is needed during machine operating, press this button. Pressing again will resume operation. 18 Francais TIMED DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program. 3. Press "More Time" And "Less Time" buttons to set a suitable time. • After setting "Timed-Dry Cycle" to "Timed Dry" , you can press these two uttons to increase or decrease drying time as you desires. 4-6.Press buttons "Temp", "Cycle Signal", "Wrinkle saver", and "Touch Up" to define your desired program. Notes: For "Timed Dry" program, use of button...

Herunterladen

Geben Sie zwei Ziffern: