Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
LEA TODAS LAS INSTRUCCIONES ANTES DE ENSAMBLAR Y USAR LA SILLA. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO. IMPORTANT SAFETY NOTICES WARNING Never leave child unattended in this product. Use only on tables 5/8” to 2” thick (16-51 mm). English Your child is ready for this product if: • He/She is at least 6 months old. • He/She weighs less than 37 pounds. • He/She is able to sit upright without help. Failure to follow these warnings could result in serious injury or death. Read these instructions carefully before assembling and using this product. Keep these instructions for future reference. Your child’s safety is very important to us, so we urge you to take the following precautions when using this product: • Never leave child unattended in this product or in the near vicinity. Keep your child in view at all times. • Ensure that the table is stable before and after you place your child in the chair. • When the chair is attached to the table, ensure that the table & chair are secure before placing your child in it. • Ensure that your child is secured in the chair at all times with the safety belt provided. • Always ensure that all hazards such as electrical devices, knives and hot liquids are kept out of reach of your child in the chair. • Before removing your child from the chair, be sure your child’s legs are free from clip-on chair supports. • Do not use on glass, crystal, or similar table surfaces. Do not use on tables with rough or uneven surfaces. Do not use on tables with a single leg, card tables, or camping tables. Do not use on table extensions or table leaves. • Do not use the chair on a table that has a tablecloth on it. Be sure to keep the chair and table surfaces clean and dry. • The table top must be at least 5/8” (16mm) thick and not more than 2” (51mm) thick. • Do not place an ordinary chair under the seat or attach the seat where your child can use his/her feet to push against the table, chairs, or other objects. This can cause the seat to shift or lift up and become unstable. • Do not hang objects on the seat that could cause the seat to become unstable. • Do not attach or detach the chair when your child is in it. • Do not allow children or animals to play near or walk under the chair while it is in use. • Do not use if the arms and table locks are not securely fastened to the table. • Do not use without tab locks or other locking/latching mechanisms attached securely to table surface. • Do not use the table seat for more than one child at a time. • Discontinue use if your child can move the chair arms on the table while he/she is in the chair. 2 Safety precautions for parts and accessories: • Ensure that the joints are securely screwed to the table before placing your child in the seat. • Do not use the seat if it is broken or damaged. Contact manufacturer immediately for replacement parts or service. • Do not use spare parts that are not supplied by the manufacturer. ASSEMBLING THE CHAIR 1. Slide the U-shaped backrest bar through the sleeve at the back of the seat cover. Make sure the pins on the tube (at both ends) are exposed on either side of the sleeve. See diagram A. BackA 2. Inspect both arms of the chair. To make sure the arms are in the correct position, the two items noted in diagram B below must be present: B 2. Round Red cap mustface outward1. Table lock 3. Slide each arm through the cover of each sleeve located on the side of the seat. Start from the back of the sleeve. See diagram C. C 4. Attach both arms onto the backrest bar. Push the tab locks in as you slide the arms over the backrest bar. Make sure you click the tab locks into place so that the bar does not rotate. See diagram D. D Tab lock 5. Attach the table-grips (paw, hoof or hand) on the end of the arm. The table-grips must be pushed all the way up to the indicated line. Next attach the two rubber stops to the front of the frame. See diagram E. ETable- GripsIndicator markRubber stops ATTACHING THE CHAIR TO THE TABLE Be sure to attach and secure the chair first before placing child in seat. 1. Make sure the two table locks (see diagram F) are angled forward. This can be done by pressing in the red button located on the sides of both arms. 2. Check that rubber feet are not interfering with anything that could cause an insecure fit. 3. Fit onto a table or safe, suitable flat surface as indicated in diagram F. Table lockF 4. Pull the table locks in the direction shown in diagram G until you hear a clicking sound. Make sure the table locks are perpendicular to the table top. 5. Rotate the plastic knobs in the direction shown in diagram G until the rubber stopper locked tight against the under surface of the table. If the chair is securely fastened to the table, you should not be able to move it by pushing on it. GPlastic knob SECURING YOUR CHILD IN THE CHAIR 1. Unfasten the safety belt and place your child in the chair. 2. Push buckle tongue into buckle housing. See diagram H. 3. Adjust with the waist strap so that it ...