Trigger This tool has an easy squeeze trigger. The trigger is located underneath the hand grip. Each squeeze of the trigger fires one staple. Make sure your finger is not on the trigger when connecting or loading the tool. ON/OFF Trigger Lock This tool is equipped with a sliding ON/OFF trigger lock. The trigger lock is located at the front of the hand grip, just above the trigger. This safety feature helps prevent accidental firing. Make sure the trigger lock reads OFF when plugging in or loadin

At rear of tool, squeeze latch on end of staple channel (see Figure 4). Pull staple channel cover out of staple channel until it stops (see Figure 4). 3. Drop staples into staple channel. Make sure staple points are facing up (see Figure 4). 4. Slide staple channel cover back into staple channel until it locks into place. Staples with Figure 4 Operating Tool 1. Unlock handle if locked. 2. Grip tool firmly. Press tool against work surface (see Figure 5). 3. Depress handle firmly to fire.

31100 Model No. 31800 Features Multipurpose tool for home, workshop, and professional use • Ergonomic design reduces hand fatigue • • Efficient torsion drive with 1/3 less effort • OPERATING INSTRUCTIONS Safety Information A WARNING Follow all safety warnings listed below and throughout manual. Improper use of this tool can cause severe injury from flying debris or firing staple into body. 1. Read and understand this manual before loading or using tool. 2. Make certain you read and un

It is your guide to safe and proper operation of this tool. Unlocking Handle 1. Hold tool base and handle. Squeeze handle to release tension on handle lock. Slip handle lock off of handle (see Figure 1). 2. Release handle. Handle will spring free. Locking Handle 1. Hold tool firmly (see Figure 2). 2. Pull handle out to release, then push handle down (see Figure 2). Handle 2 Figure 2 Continued 3. While holding handle down, slip handle lock up over Figure 3 handle (see Figure 3). Loa

Read and understand these operating instructions before operating tool. 2. Only well-instructed adults should operate tool. Never allow children to operate tool. 3. Do not operate tool • where highly flammable liquids or gases are present • while under the influence of alcohol, medication, or drugs • if exposed to rain or in damp or wet areas • while tired or in a hurry • if tool is damaged • if trigger does not turn tool on and off. 4. To reduce the risk of electric shock, this tool has a polar

Before Operating Tool 1. Read and understand these operating instructions before operating tool. 2. Only well-instructed adults should operate tool. Never allow children to operate tool. 3. Do not operate tool • where highly flammable liquids or gases are present • while under the influence of alcohol, medication, or drugs • if exposed to rain or in damp or wet areas • while tired or in a hurry • if tool is damaged • if trigger does not turn tool on and off. Have faulty switch replaced by factor

31400 effort SAFETY INFORMATION WARNING: Follow all safety warnings listed below and throughout manual. Improper use of this tool can cause severe injury from flying debris or firing staple into body. 1. Read and understand this manual before loading or using tool. 2. Make certain you read and understand all Warnings. 3. Only well-instructed adults should use tool. Never allow children to use tool. 4. When using tool, keep all body parts away from staple exit. 5. Never point tool at anyone. 6. W

If this product fails to perform for either of those reasons, DESA International will replace the tool, at DESA’s option, with an equivalent product. This warranty does not cover commercial or rental usage. This warranty gives you specific legal rights. You may also have other rights, which vary from state to state. To obtain the benefits of the warranty, contact DESA Technical Services Department at the address or number listed below. TM P.O. Box 90004 Bowling Green, KY 42102-9004 For Technical

7. Lock handle on tool when loading or not in use. 8. Never use this tool where not intended. For example, don’t use tool on concrete, metal, or glass. 9. Do not alter this tool in any way. 10. Always store tool • with staples removed and handle locked • out of children’s reach 11. Keep this manual for reference. It is your guide to safe and proper operation of this tool. UNLOCKING HANDLE 1. Hold tool base and handle. Squeeze handle to release tension on handle lock. Slip handle lock off of hand

MANUAL STAPLEGUN OPERATING INSTRUCTIONS FEATURES • Multipurpose tool for home, workshop, and professional use • Ergonomic design reduces hand fatigue • Efficient torsion drive with 1/3 less Model Nos. 31190, 31690, effort and 31890 SAFETY INFORMATION WARNING: Follow all safety warnings listed below and throughout manual. Improper use of this tool can cause severe injury from flying debris or firing staple into body. 1. Read and understand this manual before loading or using tool. 2. Make certain