Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
CALIFORNIA PROPOSITION 65 This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard IN725100AV 3/08 Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002. © 2008 Campbell Hausfeld/Scott Fetzer For parts, product & service information visit Operating Instructions Operating Instructions a. To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. b. Be thoroughly familiar with the controls and the proper use of the equipment. Follow all instructions. Contact your Campbell Hausfeld representative if you have any questions. c. Only persons well acquainted with these rules of safe operation should be allowed to use the unit. Read and understand tool labels and manual. Failure to follow warnings, dangers, and cautions could result in DEATH or SERIOUS INJURY. WORK AREA a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. b. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the better control of the tool in ignition of the dust or fumes. unexpected situations. c. Keep bystanders, children, and e. Use safety equipment. A dust mask, visitors away while operating the non-skid safety shoes and a hard tool. Distractions are able to result in hat must be used for the applicable the loss of control of the tool. conditions. PERSONAL SAFETY f. Always wear eye a. Stay alert. Watch what you are protection. doing and use common sense g. Always wear hearing when operating the tool. Do not protection when using use the tool while tired or under the tool. Prolonged exposure to the influence of drugs, alcohol, high intensity noise is able to cause or medication. A moment of hearing loss. inattention while operating the h. Do not attach the hose or tool to tool increases the risk of injury to your body. Attach the hose to the persons. structure to reduce the risk of loss of b. Dress properly. Do not wear loose balance if the hose shifts. clothing or jewelry. Contain long i. Always assume that the tool hair. Keep hair, clothing, and contains fasteners. Do not point gloves away from moving parts. the tool toward yourself or anyone Loose clothes, jewelry, or long whether it contains fasteners or not. hair increases the risk of injury to persons as a result of being caught j. Do not nail on top of another in moving parts. nail. This is able to cause the nail to c. Avoid unintentional starting. be deflected and hit someone, or cause the tool to react and result in a Be sure the switch is off before risk of injury to persons. connecting to the air supply. Do not carry the tool with your finger on k. Remove finger from the trigger the switch or connect the tool to th when not driving fasteners. Never air supply with the switch on. carry the tool with finger on trigger, d. Do not overreach. Keep proper the tool is able to fire a fastener. footing and balance at all times. Proper footing and balance enables Tool Components and Specifications • REQUIRES: 0.8 SCFM with 10 fasteners per minute @ 90 psi • AIR INLET: 1/4 inch NPT • STAPLE SIZE RANGE: 3/8 inch to 1-1/4 inch • MAGAZINE CAPACITY: 100 Staples per load, 18 gauge • WEIGHT: 3 lbs. • LENGTH: 10-1/2 inch • HEIGHT: 9-1/2 inch • MAXIMUM PRESSURE: 100 psi • PRESSURE RANGE: 60 psi – 100 psi Cap Exhaust Trigger Adjustable Depth Control Magazine Latch ButtonQuick Clear Nose Work Contact Element (WCE) Fastener Loading Area Fastener Discharge Area 2 Never place hands or any other body parts in the fastener discharge area of the tool. The tool might eject a fastener and could result in death or serious personal injury. Never carry the tool by the air hose or pull the hose to move the tool or a compressor. Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur. Always assume the tool contains fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in death or serious pe...