Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference. Framing Nailer Table Of Contents General Safety. . . . . . . . . . . . 1-2 Specifications . . . . . . . . . . . . . . 2 Operating The Nailer . . . . . . . . 3 Operational Modes. . . . . . . . . . 4 Troubleshooting. . . . . . . . . . . . 7 Fasteners . . . . . . . . . . . . . . . . . . 7 Warranty. . . . . . . . . . . . . . . . . . 8 Description This nailer is designed for framing, trusses, sub-floors, sheathing, exterior decks, and pallet/create assembly. Features include: convenient top loading magazine, no-mar tip, adjustable exhaust, single cycle trigger, and an adjustable depth of drive mechanism. General Safety Information This manual contains safety, operational and maintenance information. Read this manual and understand all safety warnings and instructions before operating the nailer. Contact your Campbell Hausfeld representative if MANUAL you have any questions. CALIFORNIA PROPOSITION 65 You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. OPERATOR’S RESPONSIBILITY: Before operating the nailer, read and understand all safety warnings and labels. Follow the operating instructions outlined in this manual. EMPLOYER’S RESPONSIBILITY: Distribute this instruction manual to all users before allowing use of the nailer. Ensure all operators read, understand and follow all safety warnings, labels and instructions outlined in this manual. Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. . Do not use any type of flammable gases or oxygen as a power source for the nailer. Use filtered, lubricated, regulated compressed air only. Use of a compressed gas instead of compressed air may cause the nailer to explode which will cause death or serious personal injury. . Do not exceed maximum operating pressure of the nailer (120 psi). The nailer will not function properly. Do not use a compressed air source capable of more than 200 psi. The nailer could explode which will cause death or serious personal injury. 120 psi MAX. . Never use gasoline or other flammable liquids to clean the nailer. Never use the nailer in the presence of flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury. . Always remain in a firmly balanced position when using or handling the nailer. . Do not modify or disable the Work Contact Element (WCE). Do not tie or tape the WCE or trigger in a depressed position. Death or serious personal injury could result. Locate model and date code on tool and record below: Model No. ________________________ Date Code ________________________ Retain these numbers for future reference. . Do not touch the trigger unless driving nails. Never attach air line to nailer or carry nailer while touching the trigger. The tool could eject a fastener which will result in death or serious personal injury. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. . Always disconnect nailer from air line before clearing jams, adjusting or servicing the nailer, relocating the nailer, or when the nailer is not in use. Always reconnect the air line BEFORE loading any fasteners. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National IN715702AV 2/08Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002. © 2008 Campbell Hausfeld / Scott Fetzer For parts, product & service information visit Nailer Components And Specifications NS219001 NS219500 • REQUIRES (SCFM with 16 nails 4.1 4.1 per minute @ 90 psi) • AIR INLET 1/4” NPT 1/4” NPT • NAIL LENGTH 2” to 2” to RANGE 31.2” 31.2” • NAIL SHANK 0.113” to 0.113” to RANGE 0.131” 0.131” • MAGAZINE CAPACITY 60-75 60-75 • WEIGHT 9 lbs 3 oz 7 lbs 6 oz • LENGTH 19.25” 19.25” • HEIGHT 15.25” 15.25” • MAX. PRESSURE 120 psi 120 psi • PRESSURE RANGE 70 - 120 psi 70 - 120 psi NS319001 NS349001 4.1 1/4” NPT 2” to 31.2” 0.113” to 0.131” 75-105 9 lbs 2 oz 18.50” 15.00” 120 psi 70 - 120 psi Adjustable Direction Exhaust Deflector Trigger Nail Loading Area Magazine Warning Labels (Backside) Debris Shield Work Contact Element Nail Discharge Area Models NS219001, NS219500, NS319001 & NS349001 Operating The Nailer Read this manual and understand...
Dieses Handbuch ist für folgende Modelle:Nailers - FRAMING NAILER NS319001 (1.56 mb)
Nailers - FRAMING NAILER NS349001 (1.56 mb)
Nailers - FRAMING NAILER NS219500 (1.56 mb)