Login:
Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Anleitung Craftsman, modell 2723303 836.27233

Hersteller: Craftsman
Dateigröße: 284.93 kb
Dateiname: 39fbb850-392e-4908-ae4d-6176c298e33e.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


NOTE: Model and serial numbers may be found on the name plate located on the tool. You should record both numbers and retain them in a safe place. instructions. all CAUTION:its Safety RulesBefore Operating read this and follow andusing this Nailer, manual E185030 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA SECTION PAGE Warranty ................................................... 2 Product Specifications ........................................ 2 Safety Instructions ........................................... Accessories and Attachments .................................. 3 6 Know Your Brad Nailer ........................................ 7 Operation .................................................. Maintenance ................................................ 7 8 Troubleshooting Guide ........................................ Parts ..................................................... 9 10 FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL ELECTRIC NAILER If this Craftsman Nailer fails due to a defect in material or workmanship within one year from the date of purchase, Sears will REPAIR it, free of charge. WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOLTOTHE NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN THE UNITED STATES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Seam, Roebuck and Co., Dept. 817 WA, Hoffman Estates,/L 60179 Power Source 120V, 60Hz, 9 Amps., AC only Nailing Speed 1 Nail per Second Nail Size -Diameter .039 o .049 inch -Head size .070 o .087 inch -Length 3/8 -1-3/16 inch Magazine Capacity 100 Nails Dimensions 8-1/2 inches long x 2-1/2 inches wide x 10 inches high Weight 4.7 pounds To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Your nailer is wired at the factory for 120V operation. Connect to a 120V, 15 amp branch circuit and use a 15 amp time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. Page 2 GENERAL SAFETY INSTRUCTIONS Do not attempt to operate this tool until you have read and thoroughly understand all instructions, safety rules, etc., contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save this owner's manual and review it frequently for continuing safe operation and instructing possible third-party users. READ ALL INSTRUCTIONS 1. KEEP WORK AREA CLEAN. Cluttered work areas and benches invite injuries. 2. GUARD AGAINST ELECTRICAL SHOCK. Be sure your body does not come in contact with grounded surfaces such as pipes, radiators, ranges, refrigerators, etc. 3. AVOID DANGEROUSWORK AREA ENVIRONMENT. Do not use power tools in damp or wet locations. Keep work area well lit. Do not expose power tools to rain, Do not use power tools in the presence of flammable liquids or gases. 4. KEEP CHILDREN AWAY. All visitors should wear safety goggles or safety glasses with side shields and be kept a safe distance from work area. Do not let visitors come in contact with tool or extension cords. 5. STORE IDLE TOOLS. When not in use, store tools in a high, dry location that can be locked. KEEP THEM OUT OF THE REACH OF CHILDREN. SAVE THESE 6. DON'T FORCETHETOOL. It will do the job better and safer if used at the rate for which it was designed. USETHE RIGHTTOOL Do not use a tool for a purpose it was not intended. For example, do not force a small tool or attachment to do the job of a heavy-duty tool. 7. ALWAYS WEAR SAFETY GOGGLES 8. or safety glasses with side shields when using power tools. Also use a face mask or dust mask if the job is dusty. g. DON'T ABUSE TOOL POWER CORD. Never carry the tool by the cord or yank the cord to disconnect it from the wail. Keep the cord away from heat, oil, and sharp edges. 10.SECURE WORK. Whenever possible, use clamps or a vise to hold the work. It's safer than using your hands and it frees both hands to use _,_=_u,. 11. DON'T OVERREACH. Keep proper footing and balance; make sure your footing is stable. 12. KEEP TOOL WELL MAINTAINED. Follow instructions for lubricating and changing accessories. When applicable, keep tool sharp and clean. Inspect cord frequently and have damaged parts repaired by a Searsservice center. Keep tool handle and housing clean, dry and free of grease and oil. Never use strong solvents or petroleum-based products to clean tool. INSTRUCTIONS Page 3 13. DISCONNECTTOOL when not in 17. REPLACEMENT PARTS, When use, before servicing and when loading or changing accessories. 14.AVOID UNINTENTIONAL STARTING. Never carry tool with your finger on the switch. 15.STAY ALERT, Watch what you are doing and use common sense. Do not operate tool when you are tired or under the influence of drugs, alcohol, or medication. 16. CHECK DA;w;AGED PARTS. Before using tool, check that all parts will operate correctly and will perform as designed. Any damaged parts should be repaired or re...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien