Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Grizzly Dateigröße: 582.84 kb Dateiname: Unterrichtssprache:

Fastener Length: G1847 ........................................................................................................1.2" to 7.8" Crowned Staples G1852 ........................................................................................................................3.8" to 13.16" Brads G1861 ........................................................................................................................5.8" to 19.16" Brads G3811......................................................................................................7.8" to 13.16" Crowned Staples Gauge: ......................................................................................................................................18 Ga. Magazine Capacity: ......................................................................................................................100 Construction: ............................................................................Cast Aluminum and Hardened Steel Coupling System: ..................................................................................................................1.4" NPT Recommended Lubricating Oil: ..........................................................................Pneumatic Tool Oil Nailer Weight: G1847......................................................................................................................................3.10 lbs. G1852......................................................................................................................................3.15 lbs. G1861......................................................................................................................................4.20 lbs. G3811......................................................................................................................................3.80 lbs. Parts and Accessories: A rebuilding kit is available from Grizzly and includes all O-rings. The rebuilding kit and other parts can be individually ordered through our Service Department. Grizzly also carries air hose,in-line regulator/filter/water-separator/lubricator, quick connect couplers and a complete line of fasteners. Please refer to a current Grizzly catalog for price and ordering information. Specifications, while accurate, are subject to change without notice. -22-G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers TROUBLESHOOTING GUIDE Symptom Cause Solution Air leaking at trigger valve area. O-Rings in trigger valve housing are damaged or dry. Replace and/or re-lubricate trigger system O-Rings. Air leaking between body and nose. 1. O-Rings are damaged or dry. 1. Replace and/or re-lubricate O-Rings. 2. Loose screws. 2. Loosen all screws first, and then tighten sequentially using 1/2 turns. 3. Bumper is damaged. 3. Replace bumper. Air leaking between body and cap. 1. O-Rings are damaged or dry. 2. Loose screws. 1. Replace and/or re-lubricate O-Rings. 2. Loosen all screws first, and then tighten sequentially using 1/2 turns. Nailer won’t shoot even when loaded and under pressure. 1. Bumper is damaged. 2. Nose piece is dirty. 3. Dirt or damage prevents the fasteners or driver from moving freely. 4. Damaged HD valve spring. 5. Inadequate air pressure. 6. O-Rings are damaged or dry. 7. Trigger is damaged. 8. Air leaks. 9. Nosepiece is misaligned. 1. Replace bumper 2. Clean nose piece. 3. Clean and inspect for damage. 4. Replace spring. 5. Adjust air pressure. 6. Replace and/or re-lubricate O-Rings. 7. Inspect trigger. Replace if necessary. 8. Replace and/or re-lubricate O-Rings and/or check for loose screws. 9. Align nosepiece. Nails don’t set properly and/or nailer does not recover quickly. 1. Nailer is inadequately lubricated. 2. HD valve spring is broken. 3. Exhaust port is blocked. 1. Disassemble and re-lubricate. 2. Replace spring. 3. Clean exhaust port. Jamming. 1. Driver guide is worn. 1. Replace guide. 2. Fasteners are incorrect size. 2. Use recommended fasteners. 3. Fasteners are bent. 3. Use straight fasteners. 4. Magazine or nose screws are loose. 4. Tighten screws sequentially. 5. Driver is damaged. 5. Replace or recondition driver. 6. Nosepiece misaligned. 6. Align nosepiece. Brads or staples are driven too far. 1. Air pressure is set too high. 2. Bumper is worn or broken. 1. Check air pressure. 2. Replace bumper. O-Rings have been replaced and/or 1. Screws were not tightened 1. Loosen all screws first, and then tighten re-lubricated, but air still leaks out. sequentially. 2. Not enough grease was used on O-Rings. 3. Wrong type of grease was used that damaged O-Rings. 4. Nailer lubrication oil is not rubber-safe. sequentially using 1.2 turns. 2. Remove O-Rings and re-lubricate. 3. Remove O-Rings and replace with new ones Use grease that is safe for rubber. 4. Completely disassemble nailer and clean Replace all O-Rings. Use rubber-safe grease for new O-Rings and only use Pneumatic Tool Oil in the future. G1847 / G1852 / G 1861 / G3811 Air Nailers/Staple...

Herunterladen

Geben Sie zwei Ziffern: