Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Do not alter this tool in any way. Only use accessories designed for this tool. 099241 2 During Operation of Tool 1. Keep all parts of body away from staple exit on tool. 2. Never point tool at anyone. 3. Keep children, animals, and bystanders away from tool and extension cord at all times. Only tool user should be in work area. 4. Stay alert. Use common sense while operating tool. 5. Keep trigger lock in the OFF position and finger off trigger until ready to drive staple. 6. Keep work area clean. Cluttered work areas invite injuries. 7. Secure work before using tool. Use both hands to operate tool. 8. Do not touch any metal part of tool when stapling into areas where electrical wiring may be present. These areas include walls, floors, and ceilings. If staple contacts electrical wire, electric shock may occur. 9. Avoid body contact with grounded objects such as pipes, fences, and metal posts. 10. Do not force tool. Use tool at rate for which it was designed. 11. Do not overreach. Keep proper footing and balance at all times. 12. Carry tool from one place to another • with tool unplugged • with trigger lock in the OFF position • with finger off the trigger General 1. Inspect tool before and after each use. Check for any damage that may affect operator safety or operation of tool. Check for broken or damaged parts. Do not use tool if damage affects safety or operation. 2. Maintain tool with care. • Never fire tool when empty of staples. This may damage tool. • Keep tool clean. • Keep handles dry, clean, and free of oil and grease. • Inspect power cord often. • Never carry tool by power cord. • Never yank power cord to unplug it. • Keep power cord away from heat, oil, and sharp edges. • Inspect extension cords often and replace if damaged. • Never oil or grease any part of tool. 3. Always store tool • with staples removed from chamber • out of children’s reach • in a high or locked place that is dry Keep these operating instructions for reference. It is your guide to safe and proper operation of this tool. 099241 3 Product Identification Power Cord Staple Chamber Cover (underneath) On/Off Trigger Lock Staple Exit Trigger Hand Grip Head Product Features The PowerFast™ Electric StapleGun is a multi-purpose tool. This tool is designed for home and workshop. It performs basic fastening jobs from installing insulation, porch screening, and ceiling tiles to repairing upholstery. Trigger This tool has an easy squeeze trigger. The trigger is located underneath the hand grip. Each squeeze of the trigger fires one staple. Make sure your finger is not on the trigger when connecting or loading the tool. ON/OFF Trigger Lock This tool is equipped with a sliding ON/OFF trigger lock. The trigger lock is located at the front of the hand grip, just above the trigger. This safety feature helps prevent accidental firing. Make sure the trigger lock reads OFF when plugging in or loading the tool. Also, make sure the trigger lock reads OFF when tool is not in use. To release, slide the trigger lock to read ON. 099241 4 Extension Cords CAUTION: Use only extension cords marked for outdoor use. Be sure to use the right size extension cord. If cord size is wrong, tool may be damaged. Tool performance may also be affected. Extension Cord Size Requirement 1 to 25 feet, use 16 AWG rated cord 26 to 50 feet, use 14 AWG rated cord Inspect extension cords often and replace if damaged. Loading Tool WARNING: Never load tool while it is plugged in. Accidental discharge may occur. Before loading, move trigger lock to the OFF position and unplug tool. 1. Move trigger lock to the OFF position (see Figure 1) and unplug tool. 2. Turn tool upside down. 3. Press in latch lock and slide staple chamber cover back until fully open (see Figures 2 and 3). Trigger Lock In Off Position Figure 1 Figure 2 Figure 3 Staple Chamber Cover Latch Lock Continued 099241 5 4. Drop staples in channel (see Figure 4). Note:We recommend that you only use PowerFast™ heavy-duty staples in this tool. Wrong staples can cause jamming. 5. Slide staple chamber cover closed. Make sure cover locks into place. Figure 4 Staples Operating Tool WARNING: Keep trigger lock in the OFF position and finger offtrigger until ready to drive staple. WARNING: Keep all body parts away from staple exit on tool. 1. Make sure trigger lock is in the OFF position. 2. Plug tool into a 120 Volt/60 Hertz outlet. 3. Grip tool firmly. 4. Slide trigger lock to the ON position. Trigger Lock Figure 5 099241 6 5. Squeeze trigger to fire. 6. IMPORTANT:Do not fire this tool when empty of staples. This may damage tool. Note:In difficult fastening jobs, press down on head of tool with palm of free hand (see Figure 6). This will improve staple driving. Figure 6 Maintenance WARNING: Do not alter this tool in any way. Only use accessoriesdesigned for this tool. WARNING: Never perform steps listed below while tool is plugged in. Acciden...