Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Consult owner’s elry which may get caught in moving manual for recommended accesparts. Non-slip footwear is recom-sories. The use of improper accesmended. Wear a protective hair cov-sories may cause risk of injury. ering to contain long hair. 20. CHECK FOR DAMAGED PARTS 12. ALWAYS USE SAFETY GLASSES. BEFORE USING. Check for bind- Also use a face or dust mask if cut-ing and alignment of parts, broken ting operation is dusty. Everyday parts, part mounting, loose bolts, eyeglasses only have impact resis-and any other conditions that may affect machine operation. Repair or tant lenses, they are NOT safety replace damaged parts. glasses. 21. NEVER LEAVE UNATTENDED 13. WEAR APPROVED HEARING TOOL CONNECTED TO AIR. PROTECTION. Air escaping from Disconnect the air hose and do not pneumatic tools can exceed safe leave tool until it is relieved of any exposure limits and may cause built up pressure. hearing damage with prolonged exposure. 22. NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL 14. SECURE WORK. Use clamps or a WHILE UNSUPERVISED. vise to hold work when practical. It is safer than using your hand and frees 23. IF YOU ARE UNSURE OF THE both hands to operate tool. INTENDED OPERATION, STOP USING TOOL. Seek formal training 15. MAINTAIN TOOLS WITH CARE. or research books or magazines Keep tools lubricated and clean that specialize in pneumatic tools. for best and safest performance. Follow instructions for lubricating 24. BE AWARE OF HOSE LOCATION and changing accessories. WHEN USING PNEUMATIC TOOLS. Hoses can easily become 16. REDUCE THE RISK OF a tripping hazard when laid across UNINTENTIONAL FIRING. Do not the floor or spread out in a disorga carry tool with hand on trigger and nized fashion. always disconnect from air when not in use. Model H7826 Flooring Nailer -3 Additional Safety Instructions for Nailers 1. HAND AND FOOT INJURIES: Do 7. NAILING: Avoid driving one nail on not place your hands or feet near the top of another. The nail may deflect nail point of entry. A nail can deflect and cause injury. and tear through the surface of the workpiece, puncturing your hand or 8. AIR SUPPLY: Disconnect the air foot. supply before installing nails, clearing a jam, moving to another work area, 2. COMPRESSED AIR RATING: Do performing maintenance, or when the not connect the nailer to compressed tool is not in use. A nailer connected air that exceeds 120 PSI. to air may fire accidentally, causing serious personal injury. DO NOT use 3. ACTUATING MECHANISM: Be a check valve or any other fitting that careful not to bump the actuating allows air to remain in the tool. mechanism when carrying or holding the tool while connected to air. 9. COMBUSTIBLE GASES: Never con- If bumped, the tool may accidentally nect the nailer to pressurized oxyshoot in a dangerous direction. gen or other combustible gases as a power source. Only use regulated 4. SAFE HANDLING: Never point the compressed air. nailer at others! Carry the nailer only by the handle, never by any other 10. CLEANING: Never use gasoline or part. Do not carry the nailer by the air other flammable liquids to clean the hose. nailer; vapors in the nailer will ignite by a spark and cause it to explode. 5. HOSE USAGE: Make sure your air hose is designed for the tool in use, is 11. TOOL SERVICE: If the nailer is leak- in good condition, and is long enough ing air, damaged, or not working corto reach your work without stretching. rectly, DO NOT use before repairing. However, an overly long air hose in the work area may be a tripping haz12. OPERATING QUESTIONS: If you ard. are not sure about the intended operation, stop using the nailer. Seek 6. HAMMER SAFETY: DO NOT use a formal training or research books or hammer with a damaged handle or magazines that specialize in pneua loose head. Make sure nobody is matic tools. standing close enough to be hit when you swing the hammer. -4-Model H7826 Flooring Nailer Nailer accidents routinely happen while moving the gun to another location, to another room, or even another job site. Always disconnect the nailer immediately after use and never transport the nailer while connected to the air—even if the air compressor is disconnected from its power source! Operating this nailer can propel objects into the air, causing immediate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when operating this equipment. In addition, this nailer discharges at up to 85-90 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer. No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results. Model H7826 Flooring Nailer -5 SECTION 2: SETUP Unpacking Inventory Your Model H7826 left our wa...