Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. This symbol is used to alert the user to useful information about proper operation of the equipment. NOTICE Safety Instructions for Machinery 1. READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users. 2. MAKE SURE ALL GUARDS ARE IN THEIR CORRECT PLACE AND WORK CORRECTLY BEFORE USING MACHINERY. NEVER OPERATE MACHINE WITHOUT GUARDS. 3. ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. 4. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to contain long hair and wear non-slip footwear. 5. NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery. 6. ONLY ALLOW TRAINED AND 13. ALWAYS DISCONNECT FROM PROPERLY SUPERVISED PER-POWER SOURCE BEFORE SONNEL TO OPERATE MACHIN-SERVICING MACHINERY. Make ERY. Make sure operation instruc-sure switch is in OFF position tions are safe and clearly under-before reconnecting. stood. 14. MAINTAIN MACHINERY WITH 7. KEEP CHILDREN AND VISITORS CARE. Keep blades sharp and AWAY. Keep all children and visi-clean for best and safest per- tors a safe distance from the work formance. Follow instructions for area. lubricating and changing accessories. 8. MAKE WORKSHOP CHILD PROOF. Use padlocks, master 15. REMOVE ADJUSTING KEYS switches, and remove start switch AND WRENCHES. Make a habit keys. of checking for keys and adjusting wrenches before turning ON 9. NEVER LEAVE WHEN MACHINE machinery. IS RUNNING. Turn power OFF and allow all moving parts to come 16. CHECK FOR DAMAGED PARTS to a complete stop before leaving BEFORE USING MACHINERY. machine unattended. Check for binding and alignment of parts, broken parts, part 10. DO NOT USE IN DANGEROUS mounting, loose bolts, and any ENVIRONMENTS. DO NOT use other conditions that may affect machinery in damp, wet locations, machine operation. Repair or or where any flammable or noxious replace damaged parts. fumes may exist. 17. USE RECOMMENDED 11. KEEP WORK AREA CLEAN AND ACCESSORIES. Refer to the WELL LIT. Clutter and dark shad-instruction manual for recomows may cause accidents. mended accessories. The use of improper accessories may cause 12. USE A GROUNDED EXTENSION risk of injury. CORD RATED FOR THE MACHINE AMPERAGE. 18. DO NOT FORCE MACHINERY. Undersized cords overheat and Work at the speed for which reduce voltage. Replace extension the machine or accessory was cords if they become damaged. DO designed. NOT use extension cords for 220V machinery. H6145 28° Clipped Head Framing Nailer -1 Additional Safety Instructions for Nailers 1. HAND INJURIES: Do not place your 5. HOSE USAGE: Make sure your hands near the nail point of entry. A air hose is designed for the tool nail can deflect and tear through the in use, is in good condition, and surface of the workpiece, puncturing is long enough to reach your work your hand or fingers. without stretching. However, an overly long air hose in the work 2. COMBUSTIBLE GASES: Never area may be a tripping hazard. connect the nailer to pressurized oxygen or other combustible gases 6. OPERATING QUESTIONS: If you as a power source. Only use fil-are not sure about the intended tered, lubricated, and regulated operation, stop using the nailer. compressed air. Seek formal training or research books or magazines that special 3. SAFE HANDLING: Never point the ize in pneumatic tools. nailer at others! Do not keep the trigger pulled when loading fasten7. MAINTENANCE: Always disconers, carrying, or holding tool. Carry nect air from the nailer when serthe nailer only by the handle, never vicing or installing nails. During by any other part. Do not carry the maintenance, a nailer connected nailer by the air hose. Disconnect to air may fire accidentally, causthe nailer from the air hose when ing serious personal injury. going up and down ladders. 8. COMPRESSED AIR RATING: Do 4. CLEANING: Never use gasoline or not connect the nailer to comother flammable liquids to clean the pressed air that exceeds 120 PSI. nailer; vapors in the nailer will ignite by a spark and cause it to explode. 9. CHECK VALVE: Do not use a check valve or any other fitting that allows air to remain in the tool. -2- H6145 28° Clipped Head Framing Nailer Operating this nailer can propel objects into the air, causing immediate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when operating this equipment. In addition, this nailer discharges at 85-90 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer. Never po...