Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and countries do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country. To obtain warranty service in the U.S. return the product, together with proof of purchase, to the U.S. Bostitch National or Regional Independent Authorized Warranty Service Center. In the U.S. you may call us at 1-800-556-6696 or visit for the location most convenient for you. In Canada please call us at 1-800-567-7705 or visit 2 SAFETY INSTRUCTIONS EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which could cause severe eye injury. The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection. CAUTION: Additional Safety Protection will be required in some environments. For example, the working area may include exposure to noise level which can lead to hearing damage. The employer and user must ensure that any necessary hearing protection is provided and used by the operator and others in the work area. Some environments will require the use of head protection equipment. When required, the employer and user must ensure that head protection conforming to ANSI Z89.1 is used. NEVER USE MALLET WITH A LOOSE HEAD OR SPLINTERED HANDLE. CAUTION: Replace worn or damaged parts immediately. CAUTION: To avoid accidental injury, to yourself and others, bystanders must maintain a safe distance from you, during use of this tool especially when swinging the mallet CAUTION: The operator should always wear safety shoes. CAUTION: Use only cleats from Bostitch. CAUTION: Never hit the plunger with the metal face of the mallet. LOADING TOOL When loading tool: 1.) Never place a hand or any part of body in fastener discharge area of tool; 2.) Never point the tool at anyone. OPERATION Always handle the tool with care: 1.) Never engage in horseplay; 2.) Never actuate the tool unless fastener discharge area of tool is directed toward the work; 3.) Keep others a safe distance from the tool while tool is in operation as accidental actuation may occur, possibly causing injury. Keep hands and body away from the discharge area of the tool. Do not drive fasteners on top of other fasteners or with the tool at an overly steep angle as this may cause deflection of fasteners which could cause injury. Do not drive fasteners close to the edge of the work piece as the wood may split, allowing the fastener to be deflected possibly causing injury. This tool produces SPARKS during operation. NEVER use the tool near flammable substances, gases or vapors including lacquer, paint, benzine, thinner, gasoline, adhesives, mastics, glues or any other material that is - or the vapors, fumes or by-products of which are -- flammable, combustible or explosive. Using the tool in any such environment could cause an EXPLOSION resulting in personal injury or death to user and bystanders. MAINTAINING THE TOOL When working on tools note the warnings in this manual and use extra care when evaluating problem tools. 3 MFN-200 TOOL SPECIFICATIONS All dimensions in inches unless otherwise specified M MM F FF N NN - -- 2 22 0 00 0 00 Description Manual Flooring Nailer Fastener Type “L”Type 16 Gauge Flooring Cleats Magazine Capacity 150 cleats Length 13-1/2” (342.9mm) Width 3-1/2” (89mm) Height 17-1/2” (444.5mm) Weight 9.71 lbs (4.40kg) MFN-200 FASTENER SPECIFICATIONS Tool Model Fastener Type Fastener SKU Gauge Length MFN-200 Manual FLN-150 16 1-1/2” Flooring Nailer FLN-200 16 2” NOTE: BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve maximum performance when used with precision BOSTITCH fasteners engineered to the same exacting standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH fasteners and accessories. 4 LOADING THE MFN-200 EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when loading, operating or servicing this tool. Eye protection is requir...
Dieses Handbuch ist für folgende Modelle:Nailers - MFN-200 (1.07 mb)