Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Husky
Dateigröße: 1.5 mb
Dateiname: 9d9e16c6-555e-412a-a05b-2ff571d9d222.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
. The safe use of the tool. . Ensuring that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. . Assuring that the tool is kept in safe working order as described in this manual. EMPLOYER’S RESPONSIBILITY: . Selecting an appropriate tool actuation system, taking into consideration the work application for which the tool is used. . Ensuring that this manual is available to operators and personnel performing maintenance. . The safe use of the tool. . Enforcing that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. . Assuring that the tool is kept in safe working order as described in this manual. . Assuring the proper maintenance of all tools in employer’s possession. Locate model and serial number on tool and record below: Model No. ________________________ Serial No. _________________________ Retain these numbers for future reference. . Ensuring that tools which require repair are not further used before repair. Tags and physical segregation are recommended means of control. Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. . Read and understand tool labels and manual. Failure to follow warnings, dangers, and cautions could result in DEATH or SERIOUS INJURY. . Do not use any type of reactive gases, including, but not limited to, oxygen and combustible gases, as a power source. Use filtered, lubricated, regulated compressed air only. Use of a reactive gas instead of compressed air may cause the tool to explode which will cause death or serious personal injury. OCO2 This tool meets or exceeds Industries’ Standards as set forth by the American IN719300AV 3/07 National Standard Institute/International Staple, Nail and Tool Association ANSI/ISANTA SNT-101-2004. © 2007 Operating Instructions Model HDN00420 General Safety Information (Continued) . Use only a pressure-regulated compressed air source to limit the air pressure supplied to the tool. The regulated pressure must not exceed 100 psi. If the regulator fails, the pressure delivered to the tool must not exceed 200 psi. The tool could explode which will cause death or serious personal injury. 100 psi MAX. . Never use gasoline or other flammable liquids to clean the tool. Never use the tool in the presence of flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury. . Always remain in a firmly balanced position when using or handling the tool. . Do not remove, tamper with, or otherwise cause the Work Contact Element (WCE) or trigger to become inoperable. Do not operate any tool which has been modified in a like fashion. Death or serious personal injury could result. . Do not touch the trigger unless driving fasteners. Never attach air line to tool or carry tool while CAMPBELLPROFESSIONALPROFESSIONALHAUSFELD touching the trigger. The tool could eject a fastener which will result in death or serious personal injury. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. . Always disconnect the tool from the power source when unattended, performing any maintenance or repair, clearing a jam, or moving the tool to a new location. Always reconnect the air line BEFORE loading any fasteners. Do not load the tool with fasteners when either the trigger is depressed or the Work Contact Element (WCE) is engaged. The tool could eject a fastener causing death or serious personal injury. . Always fit tool with a fitting or hose coupling on or near the tool in such a manner that all compressed air in the tool is discharged at the time the fitting or hose coupling is disconnected. Do not use a check valve or any other fitting which allows air to remain in the tool. Death or serious personal injury could occur. . Never place hands or any other body parts in the fastener discharge area of the tool. The tool might eject a fastener and could result in death or serious personal injury. . Never carry the tool by the air hose or pull the hose to move the tool or a compressor. Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur. . Always assume the tool contains fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental trig...