Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Workplace safety.....................................................................................................Page 7 2. Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools ...............................................Page 8 Safety advice relating specifically to this device .........................................................Page 9 Operation Preparing the device for use .........................................................................................Page 9 Changing the nozzle ....................................................................................................Page 10 Further examples of uses in the house, car and garden .............................................Page 10 Cleaning .....................................................................................................................Page 10 Service .........................................................................................................................Page 10 Warranty ...................................................................................................................Page 11 Disposal ......................................................................................................................Page 11 Declaration of conformity / Producer ................................................Page 11 GB/IE/CY Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Caution – electric shock! Danger to life! V~ Volt (AC) For indoor use only! W Watts (Effective power) Risk of loss of life by electric shock from damaged mains lead or mains plug! Safety class II Wear hearing protection, dust protec- tion mask, protective glasses and pro- tective gloves. Observe caution and safety notes! Risk of fire! Risk of explosion! Dispose packaging and appliance in an environmentally-friendly way! Keep children away from electrical power tools! Heat gun PHLG 2000-2 For removing, reshaping, preheating, defrosting etc. Introduction Please make sure you familiarise your self fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. Further details can be found in the operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Proper use The heat gun is intended for the removal of paint, for warming (e.g. heat-shrinkable sleeves) and for reshaping and welding of plastics. It may also be used for detaching glued connections and for defrosting or thawing water pipes. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. The device is not intended for commercial use. Features and equipment 1 Air inlet 2 ON / OFF switch & temperature and air volume regulator 3 Nozzle 4 Protector nozzle 5 Flat nozzle 6 Reducer nozzle 7 Barbecue lighter nozzle Included items 1 Heat gun PHLG 2000-2 1 Protector nozzle 1 Flat nozzle 1 Reducer nozzle 1 Barbecue lighter nozzle 1 Operating instructions GB/IE/CY Introduction / General safety advice Technical information Nominal voltage: Power consumption: Air volumes: 230 V ~ 50 Hz max. 2.000 W Setting I: ca. 300 l / min. Setting II: ca. 500 l / min. Temperatures (Jet outlet nozzle): Setting I: ca. 350 °C Setting II: ca. 550 °C Protection class: II / The sound pressure level (A) of the device is typically less than 70 dB (A). General safety advice WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! THE TERM “ELECTRICAL TOOL” USED IN THE SAFETY ADVICE REFERS TO ELECTRICAL TOOLS POWERED BY MAINS ELECTRICITY (BY MEANS OF A MAINS LEAD) AND ELECTRICAL TOOLS POWERED BY RECHARGEABLE BATTERIES (WITHOUT A MAINS LEAD). 1. Workplace safety a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modi...