Hersteller: Panasonic Dateigröße: 2.71 mb Dateiname: Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

Problem
Cause
● This can happen if you’ve put powder detergent directly into
the drum – you must put it in the detergent drawer.
● The amount of foam can vary, depending on the
There’s not much
temperature, level and softness of your water.
foam
● You may not be using enough detergent.
Read when the
Detergent and foam
● You may be using a reduced-foam type of detergent.
● Heavily soiled laundry can reduce the amount of foam.
need arises
● Larger loads of laundry can also reduce the amount of foam.
● The amount of foam can vary, depending on the
temperature, level and softness of your water.
There’s a lot of foam
● You may have used too much detergent.
● The type of detergent you use could cause excess foam.
● This can happen if you’ve put powder detergent directly into

the drum – you must put it in the detergent drawer.
● If your laundry has collected to one side of the drum, water
T
There’s no foam
roubleshooting
will be supplied automatically to correct the imbalance – and
this will prevent the foam wash.
● The amount of foam can vary, depending on the
temperature, level and softness of your water.
● You may have exceeded the MAX level on the detergent
Fabric softener
drawer. (see page 11)
overflows
● You may have spilt the liquid by closing the detergent drawer
too sharply.
There’s a residue of
● This can happen if you’ve put powder detergent directly into
powder detergent at
the drum – you must put it in the detergent drawer.
the end of the wash
● Check there’s nothing metal in the drum.
● Make sure the anchor bolts used in transportation have been
Noise
There’s an unusual
removed.
noise or vibration
● Check the washing machine is on a flat, stable surface.
● If none of the above seem to be causing the problem,
contact your nearest Customer Service Centre.
There’s a noise when ● This is normal: it’s the pump starting and stopping.
the water drains away
There’s a fan noise
● This is normal: it’s the fan cooling electric parts.
The electricity supply ● The washing machine will stop, and won’t start by itself
cuts out while the
when the power comes back on. You’ll need to select a
washing machine’s on
programme and start it again.
● The washing machine will stop, and won’t start by itself
Others
A circuit breaker trips
when you reset the breaker.
● You’ll need to find out what caused the breaker to trip, and
the electricity supply
put this right. Then reset the breaker, turn your electricity
supply back on, and start the washing machine again.
● When the water comes back on, it may be impure at first.
You’ll need to disconnect the water-supply hose and drain
The water supply is
any impure water through the tap before using your washing
disrupted
machine again. Remember to re-connect the water-supply
hose first.
The display isn’t
● This is probably because your washing machine is in a
clear
brightly lit or sunny position.
31

---

...

Dieses Handbuch ist für folgende Modelle:
Waschmaschinen - NA16VG1 (2.71 mb)
Waschmaschinen - NA14VA1 (2.71 mb)

Herunterladen

Geben Sie zwei Ziffern: