Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
CONTENTS Specification table the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 9 Usage of the detergent 9 Close the top lid 9 Use the operation buttons 10 Finish washing 13 Disposal after washing 14 Trouble-shooting answer to question 15 Packing list 16 Specification table Water level Water quantity (about) 1/18L 6/38L 2/24L 3/28L 4/32L 7/42L 8/46L 9/50L 5/35L 10/52LWater Injection pressure 0.03MPa~1MPa Largest rated washing / spinning capacity 7.0kg 1 Packing list Names of the parts Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user. Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. Meaning and description of the symbols Warning sign Forbidden sign Detergent box Top lid component Control pannel Balance ring Lint filter Inner tub Pulsater Front control board Cabinet Adjustable Adjustable leg leg film Handle Drain hose frame Drain hose Water absorption cushion Water inlet valve Power cord Back cover Fixed le g (3 pieces) Lint filter Automatic washing machine Between the upper cushion of the washing machine package and the upper seal of the package carton Bottom plate One Eight Inside the accessory bag Tapping screws One Inside the accessory bag One Inside the document bag One Components of the water inlet hose User's manual Inside the document bag One Warranty card One Inside the document bag 2 Safety precautions Back Front The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel. In case the washing machine is installed on ground Do not use water hotter than 50 . with carpet, do not block the ventilation hole with carpet. Trouble-shooting answer to question The water level sensor is bad. Please contact the after-sales service department. The digitron displays E6. Phenomena The reason How to settle The top lid is not closed Is the drain hose put down? Is the drain hose blocked by foreign material? Are the laundries put slantingly? Are the laundries slanting in spinning? Is the machine slanting? Is the machine slanting? The water tap is not open The water inlet valve is blocked The water pressure is too low and the current is too small Is there power failure? Is the power plug loose? Is the jointer screw of the water inlet hose is loose or twisted awry? The water faucet leaks There's abnormal sound inside the machine The machine does not act Close the top lid Put down the drain hose. Open and close the top lid once. Clean the foreign material. Open and close the top lid once. Re-order the laundries. Close the top lid.Level the machine in right position. Open and close the top lid once. Open the water tap. Push the "Start/Pause" button. Clean the water inlet valve. Push the "Start/Pause" button. Wait for the normal water pressure Before use. Use it when the power is on. Insert the power plug tightly. Level the machine properly. Re-order the laundries. Fasten the jointer screw properly. Does the water level arrive at the set water level? Affusion to the set water level. Is the power plug loose? Insert the power plug tightly. Is the top lid closed? Close the top lid Are the laundries put orderly? Put the laundries orderly. Not spin Not wash Buzzing upon reservation starts, the digitron displays "E0" Safety switch actuates, not spin, (after self-correction twice), the digitron displays "E3", buzzing No or slow water filling (not reaching the level in 30 min), the digitron displays "E4", buzzing No or slow drain, the digitron displays "E1" , buzzing. If the nozzle is choked with foreign bodies Poor or no waterfall flow Remove the foreign bodies Running pauses during spin, The top cover leaves open Close the top lid the digitron displays "E2", buzzing There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory. Common phenomena Phenomena Explanation The spinning is intermittent when it starts. The wash procedure pauses. Select spin program, but it does not work. Balance the laundries to avoid slanting. The cloth sensor is detecting , it will add water after about 48 senconds. The program is setting the drain time , certain period is needed before it starts spinning. (If there's breakdown, please pull off the power plu...