Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Technical data Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable) Weight approx. 36 kg Max. capacity 7 kg Connection voltage 220-240 V Connected load 2200 W Fuse protection 10 A Ambient temperature 5 -35°C Product number Production number Inside of door The rating plate can be found on the back of the dryer. WTZ 1130 WTZ 11410 WMZ 20500 Consumption rates Fabrics/programmes Residual moisture in the fabrics after spinning Drying time** Energy consumption** ....Cottons 7 kg ... Cupboard Dry* 1400 rpm (50%) 107 min 3.12 kWh 1000 rpm (60%) 128 min 3.90 kWh 800 rpm (70%) 149 min 4.54 kWh ....Iron Dry* 1400 rpm (50%) 83 min 1.93 kWh 1000 rpm (60%) 99 min 2.88 kWh 800 rpm (70%) 116 min 3.58 kWh ....Synthetics 3.5 kg ... Cupboard Dry* 800 rpm (40%) 47 min 1.32 kWh 600 rpm (50%) 59 min 1.72 kWh * Programme setting for testing in accordance with applicable standard DIN EN61121. ** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded. (order from the after-sales service using the order number, according to model) 11What to do if ... Turn the programme selector to Off and remove the mains plug from the socket. ..The ....Start/Pause indicator light does not light up. Mains plug plugged in? Programme selected? Check the socket fuse. ..The display panel light and indicator lights (depending on model) go out and the ....Start/ Pause indicator light flashes. Energy-saving mode is activated ..see the separate Energy-saving mode instructions. ..The display panel switches off. The appliance goes into the sleep mode after activating ....Finished in option ....page 5. ......(Fluff filter/Exhaust air duct) indicator light flashes. Clean the fluff filter ..page 4. Press the ....Start/Pause button to reset the displayed indication and then press the ....Start/Pause button again to restart the appliance if necessary. Exhaust air duct blocked or bent? Clean the exhaust air duct ..page 8. If necessary, clean the insect screen on the exhaust air pipe. ..Dryer does not start. ....Start/Pause button selected? Door closed? Programme set? ..Programme terminates shortly after starting. Ambient temperature greater than 5°C? Is the appliance loaded with the laundry? Load too small for selected programme?/Use timed programme ....page 6/7. Loaded laundry dry? ..Water is leaking out. Make sure the dryer is level. After-sales service If you cannot rectify the fault yourself (e.g. switching off/on) ..What to do if..., page 11/12, please contact our after-sales service. We will always find an appropriate solution and avoid unnecessary visits by engineers. The contact details of your local after-sales service can be found in the enclosed after-sales service directory. . GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply.) . IE 01450 2655 Please provide the after-sales service the product number (E no.) and the production number (FD) of the appliance. Product number Production number You can find this information: inside the door* / in the opened service flap* and on the rear of the appliance. *depending on the model Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest assured that the repair will be carried out by trained service technicians using original spare parts. What to do if ... . . . . . . . The door opens by itself. Drying result is not satisfactory (laundry feels too damp). Push the door closed until you hear it engage. Warm laundry feels damper than it really is. The selected programme does not suit the load. Use another drying programme or, in addition, select the timed programme a page 7. Dryer installed too closely to other objects? Provide adequate air circulation. Use y Fine adjust for the dryness levels a page 5. Fine layer of limescale on the humidity sensors a Clean the moisture sensors ....page 8. Programme termination, e.g. mains power supply failure, door open or maximum drying time reached? Drying time too long. Clean the fluff filter under running water a page 4. Insufficient supply of air a Ensure that air can circulate. Ambient temperature greater than 35°C a Ventilate the room. The humidity in the room increases. Make sure the room is sufficiently ventilated. Exhaust air duct installed/the exhaust air routes directly into the open air? ....Installation instructions for exhaust air duct, page 1. One or more indicator lights are flashing. Clean the fluff filter ..page 4/11. Check the installation conditions ..page 9. Exhaust air duct blocked or bent? Clean the exhaust air duct ..page 8. Switch off, allow to cool, switch back on, and restart the programme. Power failure. Remove the laundry from the dryer immediately and spread out. This allows the heat to dissipate. Be careful as the door, the drum and the laundry may be hot. Condensation in the exhaust air duct. 12 Exhaust...